Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PeterC

Pages: [1] 2 3 ... 6
1
Tech Talk / Re: 1980 RM 400 fouling plugs
« on: Yesterday at 08:43:22 AM »
Please let us know how you progress. Grest ride

2
Tech Talk / Re: 1980 RM 400 fouling plugs
« on: June 13, 2024, 09:25:54 AM »
There is a wealth of knowledge on here. Beware of blanket statements like " run 40:1 Motul". We do need to know much more background on the bike. Sounds like a great bike. Hope you enjoyed Connondale!

3
Tech Talk / Re: Circlip on countershaft
« on: June 11, 2024, 08:38:24 AM »
If the workshop manual, showd the front sprocket being held on by a nut (most adult sized bikes use a nut and lock tab), you should definately use the nut. A motorcycle dealer shouks stock a nut. Allowing the sprocket to move or come loose can lead to catastrophic faikure if - engine cases and or sprocket shaft. I would strongly recommend following the factory fastening system.

4
Competition / Re: Classic Weekend - Conondale QLD
« on: June 07, 2024, 09:20:46 AM »
Thsnks for advising, unfortunately us Victorians will have to spend the weekend in the cold

5
Vinduro / Re: VTR Vinduro - Bulahdelah - March 9/10 2024
« on: April 16, 2024, 08:30:56 AM »
Great pictures. Looks like you guys had a great event.

6
CZ / Re: 981 Clutch oil seals and tank colour and JETS
« on: March 20, 2024, 05:51:54 AM »
Great work making progress

7
Vinduro / Re: VTR Vinduro - Bulahdelah - March 9/10 2024
« on: March 15, 2024, 06:42:46 AM »
Fantastic photos. What a great mix of bikes.

8
General Discussion / Re: Testing yz465 ignition system who to send to?
« on: March 12, 2024, 05:50:30 AM »
So the message for all us is not to retire, we need to promote and pass on our skills to the next generations.

9
General Discussion / Re: Any old boys still here ?
« on: February 24, 2024, 04:32:55 PM »
As a relative newcomer to the forum, it is great to knpw some of the forum history. I joined to gain proper information which is difficult to find. Social media sites are full of incorrect information and advice from "Knuckle heads". I believe well administeted forums are the modern day encyclopaedias with the correct information.

I see no value in expousing rubbish information and theories.

Peter

10
General Discussion / Re: Hodaka Information
« on: February 24, 2024, 07:43:32 AM »
There is a Hodaka 125 which turns up to VERI Vinduro and sometimes the 250 Road Toad. Great compact bikes.

11
General Discussion / Re: Any old boys still here ?
« on: February 07, 2024, 08:22:43 AM »
Interesting observation re scrutineering and sound levels. Some of us may remember times when there were no sound limits and no mufflers on 2 strokes.
We often did our own scrutineering in Victoria for "Chairs" as the solo guys weren't interested in us. Even now scrutineering needs some thought prior to entry.

12
Suzuki / Re: RL250 forks - are they 35mm or 1.3/8inch ?
« on: January 18, 2024, 04:19:18 PM »
Being Japanese and European the measurements should be true Metric. I wonder what tube size they started with, any machining and what thickness of hardchroming was used. Have you checked multiple tube location measurements?


13
Wanted / Re: Ltg mullholand springs
« on: January 01, 2024, 07:58:47 AM »
Can you also measure the outside diameter of the shocks and the length of the spring required. I assume it is for a 4" travel bike?


14
Wanted / Re: Ltg mullholand springs
« on: December 24, 2023, 02:19:27 PM »
What are the dimensions etc required?

15
General Discussion / Re: Any old boys still here ?
« on: November 26, 2023, 12:06:47 PM »
To qualify as an Old boy, does one have to be old or an old membet of the Forum or both?

Pages: [1] 2 3 ... 6