Early TT600 rod bearing and crank pin wanted

[ELC hunter]

Hi all would anyone know off an aussie dealer or a person that might have these parts on the shelf after rod bearing pn.93310-634K2,Rod Pin 34K-11681-00 and thrust washers 90209-34254 for an 1987 TT600.Reading there is 3 sizes for this thing as the model progressed through it life,but the parts i need are for early type.Nothing shows up on dealer access for old stock when from my yam shop.Prefer to buy au but see what might come cheers Gavin.

[Hoony]

Try this joint in WA (Wait Awhile)

http://bbimporters.com.au/
 Phone: (08) 9295 6688

or Serco in Qld if you havn't already

[ELC hunter]

Thanks will try them.

[Eldert]

the BE pin is no longer available .  you could use a XT 500 pin . it has a smaller hole inside the pin and is about 66 gram
heavyer . you have to check of the oiling holes in the pin line up with the flywheels .

the 34 x 42 x 20 rod bearing and thrust washers you can buy from Prox racing parts .

Eldert

[ELC hunter]

Hi thanks for info will check it out have rod but pin is issue.

[Wasp]

Years ago I made my own to build the 88mm long stroke cranks. Use C45 steel , hard chrome it and then grind it down to the perfect size H7 or F7 (ISO tolerance ). Any good machine shop can do it for you . Warm the outer and freeze the pin to assemble .

[Wasp]

What are the dimensions ? I might still have some . XT , TT and XS did sometimes share dimensions .

[ELC hunter]

34x42x20 is the size Im told.

[Wasp]

Just checked , mine are 26 OD