Author Topic: Early TT600 rod bearing and crank pin wanted  (Read 5495 times)

0 Members and 1 Guest are viewing this topic.

Offline ELC hunter

  • B-Grade
  • ***
  • Posts: 272
    • View Profile
Early TT600 rod bearing and crank pin wanted
« on: April 03, 2025, 10:38:34 am »
Hi all would anyone know off an aussie dealer or a person that might have these parts on the shelf after rod bearing pn.93310-634K2,Rod Pin 34K-11681-00 and thrust washers 90209-34254 for an 1987 TT600.Reading there is 3 sizes for this thing as the model progressed through it life,but the parts i need are for early type.Nothing shows up on dealer access for old stock when from my yam shop.Prefer to buy au but see what might come cheers Gavin.

Offline Hoony

  • Legend
  • *****
  • Posts: 4316
  • Melbourne, Vic.
    • View Profile
Re: Early TT600 rod bearing and crank pin wanted
« Reply #1 on: April 05, 2025, 12:54:08 pm »
Try this joint in WA (Wait Awhile)

http://bbimporters.com.au/
 Phone: (08) 9295 6688

or Serco in Qld if you havn't already
Long time Honda Fan, but all bike nut in general, Big Bore 2 stroke fan.    http://www.youtube.com/watch?v=XJoKP6MawYI
1985 Honda CR500RF "Big Red"
1986 Honda CR250RG
2005 KTM 300EXC "The GruntMeister" ( I love that engine)

Offline ELC hunter

  • B-Grade
  • ***
  • Posts: 272
    • View Profile
Re: Early TT600 rod bearing and crank pin wanted
« Reply #2 on: April 07, 2025, 09:38:45 am »
Thanks will try them.

Offline Eldert

  • Novice
  • *
  • Posts: 23
    • View Profile
Re: Early TT600 rod bearing and crank pin wanted
« Reply #3 on: May 04, 2025, 04:19:08 pm »
the BE pin is no longer available .  you could use a XT 500 pin . it has a smaller hole inside the pin and is about 66 gram
heavyer . you have to check of the oiling holes in the pin line up with the flywheels .

the 34 x 42 x 20 rod bearing and thrust washers you can buy from Prox racing parts .

Eldert
« Last Edit: May 04, 2025, 04:27:35 pm by Eldert »