Author Topic: 1974 MX-250 swing arm question.  (Read 7935 times)

0 Members and 1 Guest are viewing this topic.

Offline Slow Poke

  • Novice
  • *
  • Posts: 6
    • View Profile
1974 MX-250 swing arm question.
« on: October 13, 2015, 02:20:58 am »
Does anyone know what, if any, Yamaha swing arm I can bolt onto my MX-250 to get an extra inch of length?
Slow Poke

Offline djr

  • C-Grade
  • **
  • Posts: 112
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #1 on: October 13, 2015, 08:50:24 am »
If you can't find a longer arm you could always extend the flat plates at the wheel end an extra inch.
I have seen this modification on several TY trials Yamaha (mostly TY175)
I think I have some photos somewhere , sorry but I don't know how to post photos here
If you search  " Yamaha TY 175 swing arm extensions" on ebay.co.uk you will see what I mean
« Last Edit: October 13, 2015, 08:58:51 am by djr »

Offline Andrew L

  • Legend
  • *****
  • Posts: 518
    • View Profile
« Last Edit: October 13, 2015, 09:09:49 am by Andrew L »
"You have not made any mistakes if you find extra pieces after assembling an object. In fact you have just found a way to make the object more efficient."

Offline djr

  • C-Grade
  • **
  • Posts: 112
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #3 on: October 13, 2015, 09:09:34 am »
http://www.ebay.co.uk/itm/Yamaha-Ty-175-Swing-Arm-Extensions-yamaha-trials-twinshock-/130746878557

I made some like these for my rt360 made a big difference

Yes ,That's the ones I was thinking of, there are also some TY250 ones that are slightly different
Shouldn't be too difficult to fabricate & easier than looking for another arm

Offline Andrew L

  • Legend
  • *****
  • Posts: 518
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #4 on: October 13, 2015, 09:27:37 am »
Added another link after you posted its a trials arm but it gives you an idea of what's involved
"You have not made any mistakes if you find extra pieces after assembling an object. In fact you have just found a way to make the object more efficient."

Offline vmxrider

  • A-Grade
  • ****
  • Posts: 366
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #5 on: October 13, 2015, 10:03:48 am »
What's the advantage of the extra length? I race an MX250 and don't really have a problem with the way it handles, dirt track or motocross.

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #6 on: October 13, 2015, 10:59:26 am »
More weight on the front for better steering.
Less likely to wheelie.
Less twitchy in a slide.
Slightly better geometry across the full range of suspension travel (not so convinced that this is more a theoretical improvement than a real one).

Most old Yammies handle better with a longer swing arm. Yamaha had this stupid habit of making a new model with a short swingarm, and then extending it the next year (YZ125C vs X, D vs E, etc). In every case, the later model clearly out handled the older version.
The good thing about telling the truth is that you don't have to remember what you said.

Offline Husk72

  • B-Grade
  • ***
  • Posts: 236
  • Attitude? What effing attitude?
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #7 on: October 13, 2015, 12:35:05 pm »
With longer swingarm, will it still be eligible for pre '75 racing ?
I ask, 1: as I'm not familiar with the rules.
         2: I have an MX that  one day I will restore, and have wondered many times if I could lengthen said part.



                                                                                       Cheers, Mark.
I used to drink a lot.
I still do,but I used to,too.

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #8 on: October 13, 2015, 12:54:46 pm »
You would need to ask MA re eligibility.  Extending the swingarm also increases wheel travel.  It would need to be checked and adjusted to suit.
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: 1974 MX-250 swing arm question.
« Reply #9 on: October 13, 2015, 01:03:02 pm »
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #10 on: October 13, 2015, 01:58:35 pm »
It's legal providing the travel at the wheel is kept below 4".
The good thing about telling the truth is that you don't have to remember what you said.

Offline facthunt

  • C-Grade
  • **
  • Posts: 110
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #11 on: October 13, 2015, 10:05:28 pm »
A DT2/3 swingarm is longer as is a YZA .

Offline Slow Poke

  • Novice
  • *
  • Posts: 6
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #12 on: October 14, 2015, 03:11:21 am »
I can't imagine that 1" after the shock mounts would significantly alter the travel.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: 1974 MX-250 swing arm question.
« Reply #13 on: October 14, 2015, 08:27:06 am »
Use the calculator in the link i posted above and see for yourself. Travel can vary depending on where the axle is in the slot but how much variation depends on the shock angle/lever ratio. With almost vertical shocks the variation will be very little.
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: 1974 MX-250 swing arm question.
« Reply #14 on: October 14, 2015, 12:06:26 pm »
The thing I found interesting about the website which can calculate travel is it listed a 30% tolerance.  The MoMS does not state a tolerance.  30% of 100mm is 130mm that is over 5 inches of travel.
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490