were will i get these

[paul]

in plastic or brass  10 ml   maico breathers

[TT]

I would have said any decent plumbing shop would be able to match that.
Is the thread 10mm (looks too course for that) or the barb?

btw I've got a plumber living next door. 

[brent j]

Failing a plumbing supplier try a hydraulic hose outfit, PIRTEK or ENZED etc

[wmc83]

Plumbing suppliers will only have that in 3/8 bsp if your lucky try a hydralic hose supplier

[wmc83]

Or a irragation outfit will do something like in plastic but metric thread might be a problem

[paul]

ok ive tried these today ,nothing yet
pirtec
enzed
the hobby shop
motorcycle shop
bursons
old motor acsessory shop
reece plumbing supply
aquarium shop
irragation shop

[wmc83]

Hmm engeneering supplier? Onesteel? I'm working with some downer edi guys next week I'll ask them if you like

[Billet YZ]

in plastic or brass  10 ml   maico breathers

Paul, when you say 10 mm do you mean that`s what size spanner fits it or is that the hose size that fits it.  If a 10 mm spanner fits it then i would say the thread could be 1/4 npt as it looks to course to be metric. You should be able to get that fitting in brass at any bearing or air hose supplier. Peter.

[paul]

in plastic or brass  10 ml   maico breathers

Paul, when you say 10 mm do you mean that`s what size spanner fits it or is that the hose size that fits it.  If a 10 mm spanner fits it then i would say the thread could be 1/4 npt as it looks to course to be metric. You should be able to get that fitting in brass at any bearing or air hose supplier. Peter.

peter 10 ml spanner /8 ml thread was what the guy at enzed said and they dont have them with that thread

[paul]

Do you want me to make you one ?

i need 2    please

[oldfart]

Gas ...supplier should have then         ask for a barb outlet   8 mm Male iron
Or go another way  FI ....then ask for a hex nipple to adpt to both threads.

[paul]

ok i will this week if i dont find any in those boxes  i got from your place   ,thanks

[paul]

Gas ...supplier should have then         ask for a barb outlet   8 mm Male iron.

  gas welding ?  like c.i.g or boac  something similar

[oldfart]

Sorry mate....  gas fitter supplier  =- LPG - NG - AC fittings                       If you go to any Reece joint looking for fittings of such it needs to be a HVAc store  http://www.reece.com.au/hvacr
Gas welding supplier  might        never had much luck myself.
     

[wmc83]

The closest you will get in a gas fitting is 1/4" bsp I've never run into anything metric