Author Topic: save weight xl.  (Read 1807 times)

0 Members and 1 Guest are viewing this topic.

Offline hampster

  • B-Grade
  • ***
  • Posts: 204
    • View Profile
save weight xl.
« on: April 30, 2009, 04:44:55 pm »
Hi,

Trying to cut some weight on an xl 350.

Looking at the back wheel, does a tl 250 or mt 250 fit/work?

I know a sl 350 works and is 2 kgs lighter but vary hard to find.


Chris. 

worms

  • Guest
Re: save weight xl.
« Reply #1 on: April 30, 2009, 05:52:24 pm »
small tip , lose wieght by going to gym ;D

mx250

  • Guest
Re: save weight xl.
« Reply #2 on: April 30, 2009, 06:17:04 pm »
small tip , lose wieght by going to gym ;D
A hampster that needs to lose weight :o :o :o :o

Offline hampster

  • B-Grade
  • ***
  • Posts: 204
    • View Profile
Re: save weight xl.
« Reply #3 on: April 30, 2009, 07:48:01 pm »
small tip , lose wieght by going to gym ;D

Looks like you cracked the master plan if i can save 10 kgs off the xl i will never have to go to gym.

Offline gorby

  • B-Grade
  • ***
  • Posts: 229
    • View Profile
Re: save weight xl.
« Reply #4 on: April 30, 2009, 10:09:21 pm »
MT250 hub is the same item excepting it runs 520 sprocket v the 530 size on the XL

the MT has a steel rim v the alloy one on the xl

Offline hampster

  • B-Grade
  • ***
  • Posts: 204
    • View Profile
Re: save weight xl.
« Reply #5 on: May 01, 2009, 07:41:39 pm »
hi,

would an sl 125 wheel work, has a cush drive just need to set up a sprocket its a lot lighter just relace the rim with an
alloy one with the right off sets and space in the swing arm.

Chris

Offline gorby

  • B-Grade
  • ***
  • Posts: 229
    • View Profile
Re: save weight xl.
« Reply #6 on: May 01, 2009, 09:27:05 pm »
the four post cush drive would only barely take the power ??? of the 125.

one good squirt of the throttle or a throttle on landing would shear them off and instant nuetral :o

stick with the original and save your gearbox,you can save considerable weight by using a sensible sized tyre.