Bassani exhaust shield

[LWC82PE]

Looks great but i  want the hole  rows  the otherway around like below pic. I just emailed you that info now. Thanks

LOTS of places have mesh but i have not bee able to find any that have 1.20mm or 18g with 3.8 holes in mild steel.
3/8 holes only come in sheets 1.5 or 1.6mm thick
Maybe 9mm holes is the go rather than 3/8 too. Another guy is also checking his Bassani

my 700x200 allows for extra so is not ultra critical. I have a friend who wants some too so i am waiting to see what size would work for his pipes so then we can just get the sheets all one size hopefully rather than a few at different sizes.

I think 1.1 should still be ok?. I know 1mm sheet is often around .90mm but thats getting too thin.

[Canam370]

so it would be wise to trim it down otherwise you will be paying for the cutting of a lot of holes that you are going to throw in the bin

Hmmm, what happens when you throw a lot of holes in the bin? Do they fall out the bottom and just keep on going?

[Frank M]

that will only happen with rimless race holes 

[LWC82PE]

I dont think i will want  to reduce the size too much. Maybe  25mm  off  length  and  width.  Lets  see  what the  quote  is  first.

[Tex]

a lot of holes that you are going to throw in the bin

Hmmm, what happens when you throw a lot of holes in the bin? Do they fall out the bottom and just keep on going?

I was wondering a similar thing to Canam370. A hole by definition is a space or absence of matter. So are you saying GMC that you would in fact be throwing nothing in the bin?   

Tex