Author Topic: Shocky bush suppliers ?  (Read 3116 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Shocky bush suppliers ?
« on: August 07, 2015, 09:13:32 AM »
Anyone know who does rubber shocky bushes for my PE 250c.

They look to be 24mm od  , 22mm wide with a 10mm id steel tube in them.
Cheers
Mike
« Last Edit: August 07, 2015, 01:41:31 PM by Mike52 »
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
Re: Shocky bush suppliers ?
« Reply #1 on: August 07, 2015, 10:50:46 AM »
Walter will have them.. buy from an Australian supplier..

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Shocky bush suppliers ?
« Reply #2 on: August 07, 2015, 02:08:41 PM »
but he still gets them made overseas :)
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
Re: Shocky bush suppliers ?
« Reply #3 on: August 07, 2015, 03:25:05 PM »
That may be the case Kerry.. but at least some of the money spent is here in OZ.. much rather support the locals.. wouldn't you..??

Offline OverTheHill

  • Legend
  • *****
  • Posts: 801
    • View Profile
Re: Shocky bush suppliers ?
« Reply #4 on: August 07, 2015, 07:21:53 PM »
How about honda rear sprocket rubber/steel bonded mounts, xr200 or just about any small honda. Just bought some from china so i'll have a measure up. Might be 9mm id not 10 but a sharp drill might fix it without unbonding. thought they were 24 od but might be wrong, could be 25. Update [30 seconds later lol] Ebayed & 24 OD--9.3 ID & 21 Wide, i'd guess the 21 is across the centre bit if it's a bit wider than outer bit where it presses in. Anyway-just an option possibly [& cheap]. Question though--did the PE's have [whatdaya call them] heim joints or uniball joints on the left to allow for misalignment due to the offset on the left for the wide QD wheel?. Sorry if i'm talking crap--i'm mostly yamaha but have an XR200 in a twin shock PE250 frame. Well. till it broke the gudgeon eye out of the rod oneday & f"£&'n totaly destroyed it [stop laughing], now it's just a smokey old 185 as a fill in. Hope that info helps but i'm real good at confusing things. Cheers.

Offline DR500

  • B-Grade
  • ***
  • Posts: 272
    • View Profile
Re: Shocky bush suppliers ?
« Reply #5 on: August 07, 2015, 07:28:33 PM »

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6002
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Shocky bush suppliers ?
« Reply #6 on: August 07, 2015, 08:00:39 PM »
You might want to check the 24mm measurement. The RM/PE shocks from that era that i ahve seen had 23mm OD

Try this part for KYB/HPG Snow/ATV shocks

http://www.deycore.com/deycore-shock-parts/kyb-hpg-shock-parts/kyb-hpg-bushings/eyelet-bushing-id-395-sleeve-length-1-178-overall-length-980.html






If you do need 24mm OD then you coul use this

http://www.pivotworks.com/ProductInfo.aspx?item_id=52656

10x24 spherical bearing
« Last Edit: August 08, 2015, 07:23:29 PM by LWC82PE »
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Re: Shocky bush suppliers ?
« Reply #7 on: August 08, 2015, 07:13:55 PM »
You might want to check the 24mm measurement. The RM/PE shocks from that era that i ahve seen had 23mm OD

Try this part for KYB/HPG Snow/ATV shocks

http://www.deycore.com/deycore-shock-parts/kyb-hpg-shock-parts/kyb-hpg-bushings/eyelet-bushing-id-395-sleeve-length-1-178-overall-length-980.html



If you do need 24mm OD then you coul use this

http://www.pivotworks.com/ProductInfo.aspx?item_id=52656

10x24 spherical bearing

I must have the wrong or non original shocks fitted although they look like the originals in
http://www.alpha-sports.com/suzuki_parts.htm

Mine are hourglass shaped od  , rubber with no outer shell and a steel central tube
Sort of like a car shock rubber.
Cheers
Mike
« Last Edit: August 08, 2015, 07:15:45 PM by Mike52 »
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6002
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Shocky bush suppliers ?
« Reply #8 on: August 08, 2015, 07:21:58 PM »
All suzuki/KYB shocks have the Suzuki part number stamped on the bodies near the top. What are the part numbers on yours?
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022