Secondhand Plastics

[oldfart]

I know the owner and You can rest assure he has keep all the GOOD PARTS  the bin was full off every thing that he had 4 or more of . The Shed clearance was well advertised for over a year .
Yes they are going to be crushed for the alloy and steel parts removed
As a matter of interest 2 months ago 2 bin loads of frames where cut up for scrap .
I pondered over buying his stock then ,but as 090 has mentioned the time required to put an ebay sight together far out weighed the capital outlay.






 






 

[dkupf]

I could do with a right hand side cover for a 1984 XT600 Yamaha. Any hope?? Darcy

[GMC]

I'm after both sidecovers for 81 XT 500 thanks. I assume all XT sidecovers were the same except paint?

[mx250]

as with all great f*ckup's throughout history, it was all done with the best intentions :'(

Don't worry, its only made what left that much more valuable 

[yzhilly]

This is my shopping list if you can help me out with , YZ400E, Gaurds ,Tank, sidecover,    IT465H, sidecovers,Gaurds,IT headlght shrouds    H & K   . Cash only direct to your bank thanks Hilly

[Stewart Allen]

Hi,
   I am after any plastics for IT490, particularly Left side cover after Bulahdelah last weekend, and any for a YZ125F.

[ianscr250]

thank god you all ride crappy slow horrible white yellow and green bikes   that leaves all the good red bits to me

[dkupf]

Speaking of red bits i need a rear guard for a Cr250m2. Darcy

[YZ250H]

Brad,

Are you starting to think you created a monster yet ?? 

Cheers
T.J.B

[gwedo]

Im looking for any plastics for IT 490 1984..cheers

[VMX Andrew]

hi wondering if you have a honda cr500 84 left hand side air scoop cheers

[cyclegod]

hi wondering if you have a honda cr500 84 left hand side air scoop cheers

Here's what you need
http://cgi.ebay.com/ebaymotors/NEW-1984-HONDA-CR500-CR-500-AIR-SHROUDS_W0QQcmdZViewItemQQcategoryZ35584QQihZ005QQitemZ150138046817

[BJJ]

Hi GodCycle

looking for 1984 YZ 250/490 left side cover and/or airbox cover.

KR

Cammos

[090]

I will check but am pretty sure i have a set of lightly scratched new ones (aftermarket) . Same as DC plastics ones.

[Tex]

What about a rear guard for a PE175C/N? Any yellow brush guards? PM me if so!

Thanks
Tex