Author Topic: Secondhand Plastics  (Read 29047 times)

0 Members and 2 Guests are viewing this topic.

090

  • Guest
Secondhand Plastics
« on: August 24, 2007, 06:52:27 pm »
Hi all, i went and bought a lot of plastics from wreckers/bike shop that are down sizing their wreckers side of things. If you are looking for something PM me and i will see if i have something for you.About $10 an item or less for multiple. 99% Jap. stuff. Cheers,Brad.




What have i done ::)

Offline Hoony

  • Legend
  • *****
  • Posts: 4309
  • Melbourne, Vic.
    • View Profile
Re: Secondhand Plastics
« Reply #1 on: August 24, 2007, 07:04:38 pm »
Ok looks like i'm first up 090.

i need a good tidy 1985 CR500 RF Right Hand side radiator shroud.
Long time Honda Fan, but all bike nut in general, Big Bore 2 stroke fan.    http://www.youtube.com/watch?v=XJoKP6MawYI
1985 Honda CR500RF "Big Red"
1986 Honda CR250RG
2005 KTM 300EXC "The GruntMeister" ( I love that engine)

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: Secondhand Plastics
« Reply #2 on: August 24, 2007, 07:10:19 pm »
Anything white, YZ and 1981/1982 will be handsomely rewarded.  ;)  At 10 bucks an item it looks like you'll have enough there to retire Brad  ;D ;D ;D

Cheers
« Last Edit: August 24, 2007, 07:15:28 pm by YZ250H »
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

090

  • Guest
Re: Secondhand Plastics
« Reply #3 on: August 24, 2007, 07:17:47 pm »
Ha Ha, i reckon they will bury me in a coffin made from the ones i will never sell!

oldfart

  • Guest
Re: Secondhand Plastics
« Reply #4 on: August 24, 2007, 07:23:17 pm »
Holy snappin duck shit .... and I thought I was being greedy filling the ute up with PE shit  :D ;D

090

  • Guest
Re: Secondhand Plastics
« Reply #5 on: August 24, 2007, 07:25:04 pm »
LOL, still went back for more as i had to sit somewhere!

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Secondhand Plastics
« Reply #6 on: August 24, 2007, 07:29:47 pm »
HOw early ?
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

oldfart

  • Guest
Re: Secondhand Plastics
« Reply #7 on: August 24, 2007, 07:35:53 pm »
where the bins still full of motors  ::)

090

  • Guest
Re: Secondhand Plastics
« Reply #8 on: August 24, 2007, 08:45:08 pm »
Yeah,i saved 2. Such a shame. Wanted to buy that stuff but he could get like $1100 a bin as scrap. Can't compete with that. Thanks for the heads up.
HOw early ?
Do you mean before i die? Or how far back do the plastics go?
« Last Edit: August 24, 2007, 08:47:37 pm by 090 »

Offline pokey

  • Legend
  • *****
  • Posts: 1454
  • Arse .. Elbow. Know the difference
    • View Profile
    • FB
Re: Secondhand Plastics
« Reply #9 on: August 24, 2007, 10:04:41 pm »
Hmmm . One wonders how he aint heard of Ebay. $10 a bottom end $5 a barrel. $10 a head  start price.  Has got to be worthwhile and better than scrap value.. I hope he  floggs it to someone who will recycle the bits and not melt them .
 Hmm perhaps i can do him a deal with listing them on ebay or a web page? i hate wasting anything.



Offline cyclegod

  • Legend
  • *****
  • Posts: 2530
  • Sunny PERTH W.A
    • View Profile
    • cyclegod on "youtube"
Re: Secondhand Plastics
« Reply #10 on: August 24, 2007, 10:41:44 pm »
I still despair at the losses over here in Perth, Warwicks wheels, Cycle salvage, Bike busters, Two wheel wreckers, Traffic motorcycle, Mundaring motorcycles all their stock gone for scrap, carted away and melted into god knows what.
When I arrived in Perth there were more than 10 wreckers and now there are but 4, One for modern dirt bikes, one for big road bikes (mostly), one for a mixed bag (Two wheel wreckers) and one just starting up that specialises in old stuff but has limited stock. Perhaps a little note from various clubs to these places that their members might be willing to buy a LOT more stuff if the wrecker is having a shed clearence sale and could provide an equally lucrative response born of the need to preserve rare or soon-to-be rare parts.
Ban BLACK rims NOW

090

  • Guest
Re: Secondhand Plastics
« Reply #11 on: August 24, 2007, 10:54:04 pm »
Sorting/ebaying is all too hard for him. Lets face it,there is a shit load of time that has to be sent sorting etc. Spent hours myself just sorting plastics into makes, let alone categorizing

Doc

  • Guest
Re: Secondhand Plastics
« Reply #12 on: August 25, 2007, 12:39:04 am »
in the mid 80's the wrecker I worked at for a short period had a clean up much the same. Bins and bins and bins full of anything and everything alloy that was made in the 60's and 70's went to a place called Brisbane Lace and Gates to be melted down and the rest went to the dump to be burried!!!! about 20 Dodge ute loads from memory! :o when I think back, I was partially responsible for filling the bins!  as with all great f*ckup's throughout history, it was all done with the best intentions :'(

Brad I be looking for a 77/78 RM80 right cover and a pair for the '78 JR50 if you spot anything with these details scrawled on them  :)
« Last Edit: August 25, 2007, 12:43:41 am by Doc »

Offline caps 999

  • Legend
  • *****
  • Posts: 1762
    • View Profile
Re: Secondhand Plastics
« Reply #13 on: August 25, 2007, 07:42:27 am »
any yzj plastics 82 models im only missing two bikes from the series (125,490) now so any plastics would help
« Last Edit: August 25, 2007, 07:48:43 am by caps 999 »
MUGEN power

Offline VMX Andrew

  • Legend
  • *****
  • Posts: 961
    • View Profile
Re: Secondhand Plastics
« Reply #14 on: August 25, 2007, 09:23:02 am »
any yz250gh 80 81 model front number plates.... ;D ;D ;D