YZ250B Exhaust + Muffler

[smalls717]

Apoligies to those that have heard it before...
Does anybody know if there is someone who makes a pipe and muffler to fit a YZ250B?
There was a thread on here before about a chap in the US who was going to make some, and wanted numbers of people interested?
I sent a message and he was developing them and would get back to me. Ive lost the e-mail now and havent had a reply for a while.
Do any of the other Yamahas come close to fitting?
Anybody just make the header pipe section?
Thnx. 

[Richo52]

Hi Tony the MX 250B are very close but not exact,I know that US guy but I have also lost the contact details......cheers Richard.

[smed]

Is it Doug Childress?

[gt96]

Did you mean the OW12 replicas?
http://forum.ozvmx.com/index.php?topic=32570.0

[Davey Crocket]

If you only need the header peace then I can make one, it's a replica of the original, let me know...it has a machined flange just like the original....ALL the aftermarket pipes are dodgy where it mounts the stub on the cylinder .

[Rossvickicampbell]

Scott Sears is the man you are referring to - was still having the pipes done up etc  -250 being different to the 360 - but still awaiting latest info.  Have to agree with Davy - the header pipe he can have made is fantastic and gorgeous to boot (I got one  ).  Jemco I think it is were also makiing an aftermarket pipe for the 360 which followed hte works bike route down the right hand side - but difficult to buy and ship with as they insisted the pipe had to be cut.

[smalls717]

Hi Davey... I would be keen to get the header pipe off you.
If you let me know $, when and how.
Thanks for the offer. Regards.

[GMC]

I can build anything if I have a bike in front of me.

I have already jigged an alloy muffler to replace the stock YZB muffler

[Davey Crocket]

There you go, GMC has the rear, I have the front....the middle is usually OK on that model.....your in business.....LOL.

[Sorelegs11]

I have a couple of Jemco pipes on my dirt trackers and they are sent incomplete, needing to be welded together and brackets fitted, service was good and they arrived 4 weeks later.
They work well but the last order I placed was paid for mid feb and still has not shown up, so if you are thinking about getting one don't be in a hurry to receive it. 

[Rossvickicampbell]

yeah - I even have to say - as much as it pains me - the GMC muffler is nice to - and yes have one of them as well 

[Iain Cameron]

Geoff looks like I need to have another trip over to Vic , mine will be a bitser nothing unusual you say . going for DT2MX cylinder in a YZb frame so looking for a works type pipe . Iain

[GMC]

Geoff looks like I need to have another trip over to Vic , mine will be a bitser nothing unusual you say .

Knew I should have kept quiet

[Iain Cameron]

Whats this # 4 pipe I should be on the frequent buyers list .

[davidmc]

Had a header pipe here somewhere, if you still need one message me and I will have a search for it.