Author Topic: Agnes Water, Qld.  (Read 6555 times)

0 Members and 1 Guest are viewing this topic.

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Agnes Water, Qld.
« on: May 08, 2014, 08:32:11 pm »
OK, I know this is a long shot but is anyone anywhere near Agnes Water in Qld, or know of a freight company that might be able to bring a bike back to Sydney/Wollongong for me? Any suggestions?
Thanks,
Pete.

Offline Mick D

  • Legend
  • *****
  • Posts: 2915
    • View Profile
Re: Agnes Water, Qld.
« Reply #1 on: May 08, 2014, 08:54:20 pm »
If someone can get it to CD for you Pete, I can bring it home from there.
And more than happy to meet you in Sydney somewhere during the following week.

« Last Edit: May 08, 2014, 09:05:07 pm by Mick D »
"light weight, and it works great"  :)

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #2 on: May 08, 2014, 09:17:26 pm »
Thanks very much Mick, that's an option. Cheers mate.

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: Agnes Water, Qld.
« Reply #3 on: May 08, 2014, 10:08:52 pm »
Ditto....I can bring it home from the Nats Pete.......any hints?
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #4 on: May 08, 2014, 10:20:02 pm »
Ditto....I can bring it home from the Nats Pete.......any hints?

Thanks Mark.
Spanish....

Offline steve234

  • Legend
  • *****
  • Posts: 897
    • View Profile
Re: Agnes Water, Qld.
« Reply #5 on: May 09, 2014, 09:11:21 am »
My bro goes up there every now and then, I'll ask when. There was a nice TT/XT for sale up there a while back.

Cheers,
Steve
Bultaco M106 Astro
Wanted: Dirt track bikes / parts / info

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #6 on: May 12, 2014, 01:15:11 am »
My bro goes up there every now and then, I'll ask when. There was a nice TT/XT for sale up there a while back.

Cheers,
Steve

Thanks Steve, that's be great.
Sorry for the late reply,
Pete.

Offline ian

  • C-Grade
  • **
  • Posts: 96
    • View Profile
Re: Agnes Water, Qld.
« Reply #7 on: May 18, 2014, 08:43:48 am »
mate I can pick it up from agnes water and bring it back to Gladstone .then if some one going to cd can pick it up on the way past .

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #8 on: May 18, 2014, 12:41:56 pm »
Thanks very much for the reply Ian. Steve234 is helping me at this stage so hopefully it will all go well, but that's a very generous offer,
Thanks again.
Pete.

Offline ian

  • C-Grade
  • **
  • Posts: 96
    • View Profile
Re: Agnes Water, Qld.
« Reply #9 on: May 18, 2014, 06:07:48 pm »
no worries if I can help in any way let me know .

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #10 on: June 05, 2014, 10:25:01 am »
Sitting in Brisbane airport waiting to get a flight back to Sydney after having just dropped my recently purchased Pursang at Fergusson's transport in Beenleigh. Quite an ordeal - flew back into Sydney from working in Thailand yesterday morning. Caught a flight to Brisbane, arrived at midday and then hired a Commodore wagon and drove 6 hours up to Agnes Water, stopping at Maryborough Supercheap to pick up some tools. Got to the guys place, pulled the bike to bits, put it in the back of the wagon and drove 3 hours back to Maryborough, getting there at 10 o'clock last night. Getting pretty tired by this time, particularly as I flew overnight from Bangkok, so booked into a flea bag motel to get a few hours kip. Got up at 2:30am and drove 3.5 hours down to Beenleigh, where I put the bike back together at the transport guys house. Then drove back to the airport and here I am, thoroughly pissed off. Madness doing this, but I only bought this bike because I had an offer from a forum member to pick it up for me and get it back south close to Brisbane. Well that didn't happen and here I am. The good news is the bike, although rough, is quite original and will be a nice addition to the stable.

Offline Mick D

  • Legend
  • *****
  • Posts: 2915
    • View Profile
Re: Agnes Water, Qld.
« Reply #11 on: June 05, 2014, 10:47:39 am »
Pete, Pete, Pete, the things we do for our young hey mate.
I was looking forward to getting that Bully from CD and bringing to your joint and picking up that gearbox at the same time.
On a brighter note, did it turn out to be the big bore you were hoping for?

Nice place Agnus Waters. Traveled on a new DR500 for seven months, camped up on the head land above the town of 1770 for a couple of weeks. What a time. Had been working out west in the mines, loaded with cash, great times.
Those two weeks are certainly contenders for two of the best weeks ever ::) 8)
« Last Edit: June 05, 2014, 01:12:11 pm by Mick D »
"light weight, and it works great"  :)

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #12 on: June 05, 2014, 10:55:22 am »
Hi Mick,
Gotta look after the kids. ;D
The bike is only a 250, but painted in the 360 colours. No problem though, as the 250 MK8 can be ridden in pre 75 by just changing the swingarm over, or that's what I'm led to believe.
Your gearbox is safe, we just have to work out how to get it to you.
Didn't get a chance to see Agnes Water as I was only there for an hour.
Cheers,
Pete.

Offline Mick D

  • Legend
  • *****
  • Posts: 2915
    • View Profile
Re: Agnes Water, Qld.
« Reply #13 on: June 05, 2014, 11:37:26 am »
Hi Mick,
Gotta look after the kids. ;D
The bike is only a 250, but painted in the 360 colours. No problem though, as the 250 MK8 can be ridden in pre 75 by just changing the swingarm over, or that's what I'm led to believe.

Hey the Mk8 is an awesome machine. And your right about changing the swinging arm and your in 8)

Arms come up on US FeeBay, or even better if some one would loan you a MK7 arm to copy an amendment from?
http://www.ebay.com/sch/i.html?_odkw=MAICO&_osacat=0&_from=R40&_trksid=p2045573.m570.l1311.R1.TR1.TRC0.A0.H1.XBultaco+swing+arm&_nkw=bultaco+swingarm&_sacat=0

I wish some one would lend me a 74 CZ arm to copy from ::)
« Last Edit: June 05, 2014, 11:43:56 am by Mick D »
"light weight, and it works great"  :)

Offline yamaico

  • Legend
  • *****
  • Posts: 816
    • View Profile
Re: Agnes Water, Qld.
« Reply #14 on: June 05, 2014, 12:04:32 pm »
Yeah Mick, they're a great model.
This is from your link:
http://www.ebay.com/itm/Bultaco-250-Pursang-Frame-swing-arm-shocks-gas-tank-/151317785748?pt=Motorcycles_Parts_Accessories&hash=item233b3e2c94&vxp=mtr
It's a MK VII and cheap enough. I'll see if he'll split it up,
Cheers.