Author Topic: Looking for a YZ125E CDI and coil.... anybody??  (Read 5652 times)

0 Members and 1 Guest are viewing this topic.

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Looking for a YZ125E CDI and coil.... anybody??
« on: March 10, 2014, 09:13:31 pm »
Hi Guys
Looking for a CDI unit for a YZ125e and a coil to hopefully solve my electrical issues on my little girl..  The coil is completely rooted because I was a bit too heavy handed testing the cable for breaks where it connects into the body of the unit. DUOH!!

Any help with where to start looking for a new CDI and coil would be appreciated.

Regards
SLAWESY
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

Offline Rookie#1

  • Legend
  • *****
  • Posts: 1744
  • JUST SHUDDUP AND RIDE IT!!!
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #1 on: March 10, 2014, 09:19:39 pm »
I shall check my box of spares in the morning and report back  ;)
THE SEXMAX.....coming soon to an Evo race near you!!! Lining up right along side the soon to be released TEDMAX!!!


CHECK OUT THE NEW FACEBOOK PAGE FOR VERi. VINTAGE ENDURO RIDERS INCORPORATED.

.https://www.facebook.com/pages/VERi-Vinduro/169617676550236

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #2 on: March 10, 2014, 09:21:47 pm »
Cheers Rookie#1
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #3 on: March 10, 2014, 09:44:41 pm »
Any similar-era Yamaha 2T dirt bike coil will work perfectly, if that's any help.
The good thing about telling the truth is that you don't have to remember what you said.

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #4 on: March 10, 2014, 09:48:27 pm »
Thanks Nathan, I had heard that. I might see if Yamaha has any NOS left.. (read: lazy)

There seems to be quite a bit on the US Ebay site, timing being the biggest drama. ie: getting it together for the next race in a fortnight.
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

Offline Viper666

  • Legend
  • *****
  • Posts: 841
  • "Yes I bought THAT number plate" so sue me!
    • View Profile
    • Ballarat Rovers MCC
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #5 on: March 11, 2014, 09:12:20 am »
SLAWESY,

Dig away at the plastic & resolder.

As for the CDI unit they were used on a few different models. 100's, 125's & 250's

There are two different CDI coils (500 & 100 ohm) again used on many different models. Or are you talking about the spark plug coil? If that is the case just about any YZ coil from 80cc to 250cc from 77 to 84 (Not big bore, they used flywheels so CDI different but will work in a pinch) will work. There is slight variations in some model but overall will work & do no harm.

I don't know if I have spares to sell but will lend you the parts to get you going, prove the fault & buy time till you can get replacements. (If Rookie can't help out.)

Ring me Perko 0427334186


http://www.boats.net/parts/detail/yamaha/Y-565-82310-10-00.html Spark plug coil

http://www.ebay.com.au/itm/Ignition-Coil-Yamaha-YZ125-YZ-125-Dirtbike-Motorcycle-1978-1979-1980-1981-NEW-/141195286128?pt=Motors_ATV_Parts_Accessories&hash=item20dfe51670&_uhb=1  Spark plug coil NEW Ebay $26 inc P&H

http://www.ebay.com.au/itm/Yamaha-genuine-charge-coil-2-YZ100-YZ125-1976-1980-vintage-VMX-565-85567-10-/321247319789?pt=AU_Motorcycle_Parts_Accessories&hash=item4acbd516ed&_uhb=1 Charge coil number 2 NOS (Aust) $86 inc P&H

http://www.ebay.com.au/itm/B11-MX250-MX360-MX400-YZ125-YZ250-YZ360-NOS-CHARGE-COIL-OE-322-85566-10-00-/261002708083?pt=Motorcycles_Parts_Accessories&hash=item3cc4f94473&_uhb=1 Charge coil no. 1 NOS (USA) $105 inc P&H

http://www.ebay.com.au/itm/1976-1979-1978-Yamaha-YZ100-YZ125-YZ175-YZ250-TZ125-CDI-Box-Igniter-Spark-Unit-/360703551004?pt=Motorcycles_Parts_Accessories&hash=item53fb9b661c&_uhb=1 CDI unit S/H $105  inc P&H

Lots on ebay if you look. Make sure for right model. CDI charge coils & units changed after 78
« Last Edit: March 12, 2014, 10:21:04 am by Viper666 »
Thank the Lord for Melbourne Bitter, anti-inflamatory drugs & an understanding wife.
YZ80H, YZ100G, YZ125E, YZ125F, YZ125G, YZ250D, YZ250E, YZ250F, YZ250G, YZ250H, YZ400F, IT125G, IT250K & a, a, a,      CRF250X???????    

How the FUG did that sh*tbox Honda get in here?

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #6 on: March 11, 2014, 04:03:34 pm »
Brilliant Perko!! I will just see how I go with the couple of avenues i have investigated.

I was talking about the spark plug coil.  I will give you a call in the next day or two.. Cheers!!
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #7 on: March 11, 2014, 04:07:26 pm »
Gwylum will have the stuff you lunatic.
QVMX.....Australia's #1 VMX club......leading the way.

Offline crossedup2

  • B-Grade
  • ***
  • Posts: 249
  • Never enough shed time.....
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #8 on: March 11, 2014, 04:18:03 pm »
Just for others who may need these parts you can find the stator coils here. I have some but not installed (yet) and they look ok.

http://www.ebay.com.au/itm/1974-1986-YAMAHA-YZ125-SOURCE-COIL-STATOR-GENERATOR-NEW-/321200843026?pt=Motorcycles_Parts_Accessories&hash=item4ac90fe912#ht_1927wt_1365

Peter B
Anything Yamaha. AT1, CT1 (X3), RT1, DT3 (x3), YZ125X,  YZ250E, YZ400D, IT175E, IT250H, XR500RC . Always looking for Pre 78 Yamaha stuff....

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #9 on: March 11, 2014, 09:54:43 pm »
Quote
Gwylum will have the stuff you lunatic.

 ;D Thanks Davey. Did not think to go straight to the man...  BTW guess what I found the other day that I took to BMCC sign on day for you??
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #10 on: March 11, 2014, 11:05:36 pm »
Good, been meaning to ring you.
QVMX.....Australia's #1 VMX club......leading the way.

Offline Lozza

  • Legend
  • *****
  • Posts: 4206
    • View Profile
Re: Looking for a YZ125E CDI and coil.... anybody??
« Reply #11 on: March 11, 2014, 11:59:35 pm »
I could have a coil here you can have
Jesus only loves two strokes