Author Topic: Shock length  (Read 1971 times)

0 Members and 1 Guest are viewing this topic.

Offline scottm

  • B-Grade
  • ***
  • Posts: 159
    • View Profile
Shock length
« on: October 23, 2013, 05:37:15 pm »
Can anyone suggest a replacement for rear shocks on a 1979 wr 390 husky, and what length eye to eye

cheers Scott
pre 84 thank you very much

Offline HVA61

  • Legend
  • *****
  • Posts: 627
    • View Profile
Re: Shock length
« Reply #1 on: October 23, 2013, 06:22:47 pm »
420mm eye to eye with remote res.

Ebay usa is a good source

if you get stuck i have a few sets
Autos are the way forward , see you round like a robot
Take the short cut, go Cross Country
The shortest distance between two points is Cross Country
CCM's and HL's bark like mad dogs

Offline scottm

  • B-Grade
  • ***
  • Posts: 159
    • View Profile
Re: Shock length
« Reply #2 on: October 23, 2013, 08:21:17 pm »
Thanks Rob
pre 84 thank you very much

Offline Husky500evo

  • Legend
  • *****
  • Posts: 870
    • View Profile
Re: Shock length
« Reply #3 on: October 27, 2013, 05:47:18 pm »
420mm eye to eye with remote res.
     Hey Shoey, are you sure about that ? I used a set of 383mm Ohlins remote reservoirs off a '79 390 Auto (which would be the same as a WR) on my '77 CR390. I could be wrong, so I might have to go and double check, but I thought that the '79 CR250 and 390 had 420mm remote reservoir shocks, but the WRs had shorter 383mm shocks. The WR and CR125 models always seemed to lag a year behind the bigger CR models, with technology and the '78 CRs were the first ones to come out with Ohlins (383mm)   I have a '79 CR390 buried in my shed somewhere and I have the shocks off it, with a tag on them telling me what they are from. Might have to go and run a tape measure over them.
      But as you say, Ebay USA is definitely the best source.
   
« Last Edit: October 28, 2013, 07:14:45 am by Husky500evo »