Cz primary drive '72

[09.0]

Chasing as the title suggests, the later style primary drive gear, key, washer and nut as opposed to the early tapered system.
Cheers big ears!

[tony27]

www.czmotocross.eu has them, listing on ebay at mo as well. Have always found their service pretty good

http://www.ebay.com/itm/cz-motocross-cz-cross-CZ-125-cz-250-cz-380-jawa-GEAR-vintage-cz-175-/260935469078?pt=Motorcycles_Parts_Accessories&hash=item3cc0f74816

[09.0]

Thanks Tony.
I was hoping for something a bit more local to keep the project ticking over.

[jimg1au]

brad
my 72 sold now is the other type i think you need the 73 or later yellow tanker 380s had the tapered system.heaps of parts in the states or les.just a phone call away and you c/c and your part is on the way.le holth cr burtes ect tryed the c/weedy yet
jim

[09.0]

brad
my 72 sold now is the other type i think you need the 73 or later yellow tanker 380s had the tapered system.heaps of parts in the states or les.just a phone call away and you c/c and your part is on the way.le holth cr burtes ect tryed the c/weedy yet
jim

Early models have the taper and from '72 they went to a keyed shaft which is the type I'm after. It would be easy enough to get outside of oz, but I was hoping to get one locally to keep the motor rebuild going.

[jimg1au]

http://www.czmadness.net/techdata/Canada%20Parts/Parts026.jpg

http://wwhttp://www.czmadness.net/techdata/Canada%20Parts/Canada%20Parts.


http://www.czmadness.net/techdata/Canada%20Parts/Canada%20Parts.html

from cz madness web page and  mid 1973 they changed yes early ones had the taper so do 1972 yellow tankers my bike has one and the spare crank sitting in my container has one as well.also the original rusty crank has the taper these are all full circle cranks. how are you keeping the motor build going wasting time waiting for a local bloke to sell you one when the right new part could be on the way to you now by air mail.
just my thoughts when i am building motors 80% nof the time its cheaper from the states than here i have found not only cz parts but montesa and also cr250 hondas.i still have both

[shortshifter]

Brad,I have some spare primary gear stuff,you'd have to see it to make sure its right.Send me your email and i'll take some piccies of what I've got.Paul

[09.0]

Thanks Paul. Will do.

[shortshifter]

Brad I just noticed that Guy at Cedar Creek is advertising new CZ parts on ebay,might be worth checking out.

[paul]

http://www.ebay.com.au/itm/CZ-vintage-mx-parts-984-980-981-/251262244003?pt=AU_Motorcycles&hash=item3a806594a3

[09.0]

That's Guy. I already hit him up.

[worms]

had 1 but used it as a sinker, sorry.

Worms

[09.0]

Ha. They are made of good metal. Unlike a Yamaha. It would rust away in no time.
How can you take a bike seriously when it's name sounds like a punchline. Yamahahahaha...

[worms]

i'm a husky convert now.

[09.0]

You wouldn't know quality machinery if it lapped you!