Author Topic: Stolen CAN-AM 1974 TNT 250, Victoria point Qld  (Read 9358 times)

0 Members and 2 Guests are viewing this topic.

Offline mitcho

  • Novice
  • *
  • Posts: 11
    • View Profile
Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« on: February 28, 2013, 01:35:42 pm »
Looking for any leads...My 1974 CAN-AM 250 TNT was stolen 5 days ago from home shed.
Was race prepped 27M. with enduro gear removed. last competed in QlD classic titiles Harrisville 2012.

Distinctive features: 1. non original chain guide(home made) ,  2.small tear in side of seat (repaired heat weld) 3. Fork brace, original trellebourg front knobby (only because rim lock is seized) 4. new progessive rear shocks 5. Steering head bearings are RS 6. MX3  orange foot pegs 7. all new plastics with decal kit 8.tank mounting bracket  non original 9. oil injector in place. 10.  New feul petcock
this is the obvious stuff, but there are other indicators.....

Can anyone help with advice regarding  recovery ?  More than happy  to offer a reward 
thanks for looking   :'(
  Mitch  0417636578

Offline VMX247

  • Megastar
  • *******
  • Posts: 8766
  • Western Australia
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #1 on: February 28, 2013, 07:16:51 pm »
yes its enough to make ya cry..
Youve been working on that for two years. !
Best wishs for getting her back in your shed.

Best is in the West !!

Offline FireKwaka

  • B-Grade
  • ***
  • Posts: 157
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #2 on: February 28, 2013, 08:59:39 pm »
I feel for you Mitch, I had one of those Can Am's fantastic bike. Scumbag bastards, i will remember to keep an eye out for those features for years to come. hope it gets safely back to you soon.
83 KX500, 83 RM250D, Can Am MX2.

Offline 09.0

  • Legend
  • *****
  • Posts: 1244
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #3 on: February 28, 2013, 10:06:19 pm »
The fact it's a 74 Can Am is enough of a distinctive feature. I will have my eyes peeled.

Offline Rookie#1

  • Legend
  • *****
  • Posts: 1744
  • JUST SHUDDUP AND RIDE IT!!!
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #4 on: February 28, 2013, 10:12:35 pm »
FLUCKIN DIRTY STINKIN JOBLESS PATHETIC COCKSMOKIN ASSCLOWNS!!! I HOPE THAT YOU ARE PERSONALLY LUCKY ENOUGH TO COME ACROSS THE FILTHY CARNTS YOURSELF, I WOULD SUGGEST YOU GOUGE OUT THEIR EYEBALLS THEN SHOVE THEM UP THEIR ARSE SO THEY GET TO WATCH YOU KICK THE SHIT OUTTA THEM!!!! FLUCKIN DIRTY STINKIN RAT CARNTS!!!

Rant over, regards. Brendan
« Last Edit: February 28, 2013, 10:14:43 pm by Rookie#1 »
THE SEXMAX.....coming soon to an Evo race near you!!! Lining up right along side the soon to be released TEDMAX!!!


CHECK OUT THE NEW FACEBOOK PAGE FOR VERi. VINTAGE ENDURO RIDERS INCORPORATED.

.https://www.facebook.com/pages/VERi-Vinduro/169617676550236

Offline John Orchard

  • Legend
  • *****
  • Posts: 3065
  • ^^^ July 1984
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #5 on: February 28, 2013, 10:14:28 pm »
Brendan what do you really think?  ;-)
Johnny O - Tahition_Red factory rider.

Tony T

  • Guest
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #6 on: February 28, 2013, 10:23:24 pm »
That's flirtation for young, Rookie!  :D

I'd imagine they have no idea what they stole.
A 2010 CR250 would be way easier to hide.
Hopefully the stinkin' bastards work out what they've got and realise they can't do much with it.  >:(

Offline Rookie#1

  • Legend
  • *****
  • Posts: 1744
  • JUST SHUDDUP AND RIDE IT!!!
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #7 on: February 28, 2013, 10:47:04 pm »
That's flirtation for young, Rookie!  :D

I'd imagine they have no idea what they stole.
A 2010 CR250 would be way easier to hide.
Hopefully the stinkin' bastards work out what they've got and realise they can't do much with it.  >:(

I doubt it tony, wouldn't a "2010" CR250 be the only one of its kind in the world!  :D ;)
THE SEXMAX.....coming soon to an Evo race near you!!! Lining up right along side the soon to be released TEDMAX!!!


CHECK OUT THE NEW FACEBOOK PAGE FOR VERi. VINTAGE ENDURO RIDERS INCORPORATED.

.https://www.facebook.com/pages/VERi-Vinduro/169617676550236

Tony T

  • Guest
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #8 on: February 28, 2013, 10:55:46 pm »
Picky bastard.......... you know what I meant..........  >:(

Just for that, I'll camp next to you at Tallarook and keep you awake with my snoring...........

Offline Canam370

  • Legend
  • *****
  • Posts: 1608
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #9 on: February 28, 2013, 11:05:52 pm »
......and thats no idle threat!
WANTED. Canams;all models,complete or parts.SWM stuff too!

I'm THE Thread Killer - when I post a thread dies!

Offline Rookie#1

  • Legend
  • *****
  • Posts: 1744
  • JUST SHUDDUP AND RIDE IT!!!
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #10 on: February 28, 2013, 11:08:23 pm »
Picky bastard.......... you know what I meant..........  >:(

Just for that, I'll camp next to you at Tallarook and keep you awake with my snoring...........

Deal! I'll see your snoring and raise you flatulence that would bring a tear to a glass eye!!  :D
THE SEXMAX.....coming soon to an Evo race near you!!! Lining up right along side the soon to be released TEDMAX!!!


CHECK OUT THE NEW FACEBOOK PAGE FOR VERi. VINTAGE ENDURO RIDERS INCORPORATED.

.https://www.facebook.com/pages/VERi-Vinduro/169617676550236

Offline KTMaico

  • A-Grade
  • ****
  • Posts: 349
  • "Love or Lust it's always a Maico"
    • View Profile
    • Maico Lovers & Fans
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #11 on: March 04, 2013, 08:34:56 am »
Mitcho,
           Any word on the missing Can Am? Has the bike or the thieves been found?

Kevin
1981 Maico 490 (Special Build)
1979 Husqvarna CR250
1975 Suzuki RH250
1975 Suzuki RM125 S
1959 Mk1 Jaguar 3.4 4 speed manual with O/Drive

Offline mitcho

  • Novice
  • *
  • Posts: 11
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #12 on: March 04, 2013, 02:18:56 pm »
Thanks to all those who responded.... some good advice....no leads yet ...bike has not turned up .... Thanks for looking and hopefully  this will never happen to you boys....
I like the guard dogs idea....
Mitcho   :'(

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #13 on: March 04, 2013, 03:39:29 pm »
I know it's shutting the gate after the horse has bolted but it's always a good idea to remove the front wheel from the bike and keep the wheel in one place and the axle in another....both away from the bike.
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline Toolboy

  • A-Grade
  • ****
  • Posts: 340
    • View Profile
Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
« Reply #14 on: March 04, 2013, 04:48:28 pm »
Living in Alice Springs i always removed the back wheel after rides and stashed the axles in a safe place, that way the theives had to carry the bikes out...never easy to lift a 400 or 250... suprising i never had an incident in the 10 years i was there,,,touch wood it never happens...good luck mitcho will keep an eye out up the sunny coast.

Tim
82 RM250Z
79 RM400N
76 RM370A
74 TM400L
05 M50 Boulevard
1986 RM80G
1974 RV125
1994 DS80
2005 JR50