« previous next »
Pages: [1]   Go Down

Author Topic: MT 250 Barrel on a CR  (Read 1574 times)

0 Members and 1 Guest are viewing this topic.

Offline PCMAX

  • B-Grade
  • ***
  • Posts: 254
    • View Profile
MT 250 Barrel on a CR
« on: July 22, 2012, 06:40:47 pm »
Anyone know if the MT barrel drops straight on to the CR? What's the difference in power spread?
Logged
74 MX250A, 75 CR250, 82 CR125, 82 YZ250J, 84 XR250,

Offline Noel

  • Legend
  • *****
  • Posts: 953
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #1 on: July 22, 2012, 06:52:28 pm »
Not your 75/76 CR, ehaust port on opposite side
will fit 73 /74 but you need the head as well, and probably the piston,
a very detuned   compared to CR

Noel
Logged

Offline PCMAX

  • B-Grade
  • ***
  • Posts: 254
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #2 on: July 22, 2012, 07:17:21 pm »
Ahhh thanks Noel, I just went back and had a look at the pics of the one I was looking at on Ebay (http://www.ebay.com.au/itm/260974336819?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649) and you are quite correct exhaust on the wrong side. The upside down pics threw me a bit though I was almost convinced it would fit.

I can go tell the wife I just saved another $97.50 on VMX parts then ;D ;D ;D
Logged
74 MX250A, 75 CR250, 82 CR125, 82 YZ250J, 84 XR250,

Offline Lozza

  • Legend
  • *****
  • Posts: 4206
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #3 on: July 22, 2012, 11:42:08 pm »
Modified MT cylinder is the best thing you can do for a CR.
Logged
Jesus only loves two strokes

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #4 on: July 23, 2012, 07:33:52 am »
lozza
they dont fit 75/76 crs only 73/74 i have both cr engines
Logged

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #5 on: July 23, 2012, 08:07:48 am »
Logged

Offline PCMAX

  • B-Grade
  • ***
  • Posts: 254
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #6 on: July 23, 2012, 09:09:18 am »
Logged
74 MX250A, 75 CR250, 82 CR125, 82 YZ250J, 84 XR250,

Offline Lozza

  • Legend
  • *****
  • Posts: 4206
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #7 on: July 23, 2012, 11:46:29 pm »
Later has short base studs early has long through studs, early has exhaust duct on the right later has outlet on the left. I have a 75 model here ATM I'll see how hard it would be to fit the early cylinder and use long studs/bolts. Early cylinder looks like it has more potential especialy if you convert to a reed.
Logged
Jesus only loves two strokes

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: MT 250 Barrel on a CR
« Reply #8 on: July 24, 2012, 06:17:30 am »
i domt think so it was for sale if you needed one.i think matcho mick has a nos 75/76 barrel for sale
jim
Logged
Pages: [1]   Go Up
« previous next »