« previous next »
Pages: [1]   Go Down

Author Topic: Gearbox bearings  (Read 3633 times)

0 Members and 1 Guest are viewing this topic.

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Gearbox bearings
« on: February 14, 2012, 10:12:18 pm »
Does anybody know where I can get new split cage needle roller bearings?
Both KTMs I have use them so I guess they are common?
Thanks in advance, Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline ozktm151

  • B-Grade
  • ***
  • Posts: 173
    • View Profile
Re: Gearbox bearings
« Reply #1 on: February 15, 2012, 08:46:21 pm »
Grahame, Just did a quick check using 1980 125 part number 500.33.099.000 with Boltons none on stock. You could try Andre @ KTM klassiker or Al @ Penton Parts. Could also see if your local bearing supplier has them. Never gone and replaced one of those bearings but there is a first time for everything. Hope this will help. Bill
Logged

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Re: Gearbox bearings
« Reply #2 on: February 16, 2012, 06:40:26 am »
Thanks for that lead. After chasing around different bearing supplies in Melbourne and a couple of hours on the Internet, I tried Boltons. They had 3 in stock which I picked up yesterday at 4pm. I guess this is why they showed out of stock a bit later.
Very happy now, Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline Slakewell

  • Legend
  • *****
  • Posts: 3577
  • Slakewell Motordrome
    • View Profile
Re: Gearbox bearings
« Reply #3 on: February 16, 2012, 02:10:15 pm »
Change over to plain bearings,I have and had no problems, to buy the  KTM ones you will need to sell the house and get an extra job.
Measure up the bearings or just take of the KTM ones to the local bearing guy. 
Logged
Current bikes. KTM MC 250 77 Husky CR 360 77, Husky 82 420 Auto Bitsa XR 200 project. Dont need a pickle just need to ride my motorcickle

Offline ozktm151

  • B-Grade
  • ***
  • Posts: 173
    • View Profile
Re: Gearbox bearings
« Reply #4 on: February 16, 2012, 06:29:30 pm »
What are you restoring Grahame and could you tell me the price of the bearings. Cheers Bill
Logged

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Re: Gearbox bearings
« Reply #5 on: February 16, 2012, 08:57:51 pm »
Hi Bill, the bike is a 1985 125RV. I think the bottom end maybe had some water damage the bearings. These were the only ones I couldn't get. Boltons price was $31 for each complete bearing (2 pieces).
Cheers, Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Re: Gearbox bearings
« Reply #6 on: February 16, 2012, 09:01:33 pm »
Just read my own post after putting up, it's a 1981 model.
It has KYB remote reservoir shocks on it. What should it have?
Thanks, Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline oz555ktm

  • Legend
  • *****
  • Posts: 2168
    • View Profile
Re: Gearbox bearings
« Reply #7 on: February 16, 2012, 10:58:03 pm »

 was this the bike that was on E- bay a few weeks a go .
Logged
And Please forgive me as I cant Spell for Shit ...
And I have very Bad Gramer ...too I been told ......

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Re: Gearbox bearings
« Reply #8 on: February 17, 2012, 06:40:20 am »
December last year. It has been sold 3 times in the last year or so. Now it has someone who loves it.
Cheers, Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline ozktm151

  • B-Grade
  • ***
  • Posts: 173
    • View Profile
Re: Gearbox bearings
« Reply #9 on: February 17, 2012, 06:49:44 pm »
Just finished putting one together myself thanks to 555. A couple of photos on my page
Logged

Offline Slakewell

  • Legend
  • *****
  • Posts: 3577
  • Slakewell Motordrome
    • View Profile
Re: Gearbox bearings
« Reply #10 on: February 17, 2012, 07:02:10 pm »
Quote from: mustanggrahame on February 16, 2012, 09:01:33 pm
Just read my own post after putting up, it's a 1981 model.
It has KYB remote reservoir shocks on it. What should it have?
Thanks, Grahame

Air or water cooled? They came with Ohlins shocks
Logged
Current bikes. KTM MC 250 77 Husky CR 360 77, Husky 82 420 Auto Bitsa XR 200 project. Dont need a pickle just need to ride my motorcickle

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Re: Gearbox bearings
« Reply #11 on: February 18, 2012, 08:16:03 am »
I have a brochure for the 1981 MX and Enduro models. Bert Flood has written on it that all bikes come with Ohlins Piggyback except for the 125. I wondered what this meant seeing as mine doesn't have them on either.
I'll put up some pictures soon.
Cheers, Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline supermotomc

  • C-Grade
  • **
  • Posts: 83
  • SWM ktm, dealer mechanic 1977-1995
    • View Profile
Re: Gearbox bearings
« Reply #12 on: February 19, 2012, 03:41:43 pm »
sachs hydro cross  shocks that's original
Logged
Pages: [1]   Go Up
« previous next »