Author Topic: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts  (Read 5654 times)

0 Members and 1 Guest are viewing this topic.

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #15 on: August 27, 2011, 02:02:11 pm »
Quote
As I have said in another post...I can remember being on the starting line at Ravo many years ago at a Nats ...along side was 211 and next to him was A.C..... they were having a discussion about the RH motor in the TM at the time........that same meeting is the cover shot on VMX 1 (tho not actually numbered 1)....so that was 1998 and the RH is in it then....
You're right Brian...I just had a look at some old photos from that meeting at Ravo and vaguely remember Ray Ryan pointing out the RH motor to me. I remember doing a piece on Andy for ADB in the mid 90's and Andy gave me a guided tour of his bikes (250 and 400) and remember how stock they actually were. The TM250 was most definitely all TM. It even had those dreaded TS185 shocks ;D.
« Last Edit: August 27, 2011, 02:09:28 pm by firko »
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #16 on: August 27, 2011, 02:08:44 pm »

Quote
As I have said in another post...I can remember being on the starting line at Ravo many years ago at a Nats ...along side was 211 and next to him was A.C..... they were having a discussion about the RH motor in the TM at the time........that same meeting is the cover shot on VMX 1 (tho not actually numbered 1)....so that was 1998 and the RH is in it then....
You're right Brian...I just had a look at some old photos from that meeting at Ravo and vaguely remember Ray Ryan pointing out the RH motor to me. To my knowledge that was the first time Andy raced vintage outside of S.A. and boy didn't he let us know he's arrived! By coincidence it was the last time the previous "king" Ronny Dinsdale rode for a long time so it was kind of "the king is dead..long live the (new) king"...my apologies to Willian Shakespeare.


I raced against Andy in '94 at the Qld Cherribah nats and he was TM mounted then and i ended up winning the title.. might have been different if the RH motor was in his bike  ;)

Offline paul

  • Legend
  • *****
  • Posts: 4957
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #17 on: August 27, 2011, 02:11:21 pm »

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #18 on: August 27, 2011, 02:16:28 pm »
Quote
I raced against Andy in '94 at the Qld Cherribah nats and he was TM mounted then and i ended up winning the title.. might have been different if the RH motor was in his bike  
That's it, Iremember now, Cherabah was where I interviewed Andy for the ADB piece. You're one of the very few who ever beat Andy John, quite an achievement mate ;)

How good were both of the Cherabah Nats? I reckon they were right up there as two of the best race meetings, vintage or otherwise that I ever attended.
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #19 on: August 27, 2011, 05:30:53 pm »
Quote
I raced against Andy in '94 at the Qld Cherribah nats and he was TM mounted then and i ended up winning the title.. might have been different if the RH motor was in his bike  
That's it, Iremember now, Cherabah was where I interviewed Andy for the ADB piece. You're one of the very few who ever beat Andy John, quite an achievement mate ;)

How good were both of the Cherabah Nats? I reckon they were right up there as two of the best race meetings, vintage or otherwise that I ever attended.
Thanks Firko.. I only did the first Cheribah and it was a great meeting and a good track, i think there were about 150 entries and the classes were just pre '75 and earlier back then so that's good numbers.

TM BILL

  • Guest
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #20 on: August 27, 2011, 05:33:18 pm »
What were you racing back then John .

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #21 on: August 27, 2011, 05:46:36 pm »
Bill i had a couple of nice CR125 and CR250m elsinores which are now in the posession of Col Metcher.

Offline paul

  • Legend
  • *****
  • Posts: 4957
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #22 on: August 30, 2011, 02:55:41 pm »

Offline tr3nt

  • C-Grade
  • **
  • Posts: 79
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #23 on: August 30, 2011, 08:38:33 pm »
Ahh if only I had the money, would love to own it. Maybe if I win the lotto this saturday night I can buy the lot and keep it all together

Offline oldyzman

  • Legend
  • *****
  • Posts: 2187
  • 250 two stroke!
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #24 on: September 07, 2011, 09:05:15 pm »
$3500.00 Seems inexpensive to me, VMX Bikes have really dropped in price, therr was anothe TM250 on there for a starting bid of $2000  -no bids.
Brett
I have a soft spot japanese mxers with aluminium tanks. Two stroke classic Dirt Track...

Offline shortshifter

  • Legend
  • *****
  • Posts: 667
  • Sunshine Coast QLD
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #25 on: September 08, 2011, 12:31:02 pm »
Did someone buy this?I think the other stuff sold.I think we'll be kicking ourselves about not grabbing this stuff when it came up for auction in years to come.I think the term Legend is over used these days but I reckon AC was the real deal and it would be great to have one of his bikes in the shed or on the track.Sad reflection on the GFC and how things have tightened up a bit financially. :-\

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #26 on: September 08, 2011, 01:02:12 pm »
I think the provenance is kosher on the RH/TM but I'm a bit iffy about any of that other stuff being Andy's actual race tackle. They look too well used to be the bikes I saw Andy ride.
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline Slakewell

  • Legend
  • *****
  • Posts: 3577
  • Slakewell Motordrome
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #27 on: September 08, 2011, 01:08:11 pm »
I would have thought 3k just for a RH would be worth it. Money is getting tighter
Current bikes. KTM MC 250 77 Husky CR 360 77, Husky 82 420 Auto Bitsa XR 200 project. Dont need a pickle just need to ride my motorcickle

Offline bazza

  • Legend
  • *****
  • Posts: 2353
    • View Profile
Re: TM-Frame-RH-250-Motor-EX-Andy-Caldecotts
« Reply #28 on: September 08, 2011, 03:05:49 pm »
Alison did you grab the rh / tm ?
Once you go black  you will never go back - allblacks
Maico - B44 -1976 CR250- 66 Mustang YZF450,RM250
Embrace patina