Author Topic: 1979 YZ125F  (Read 2784 times)

0 Members and 1 Guest are viewing this topic.

mainline

  • Guest
1979 YZ125F
« on: July 04, 2011, 06:03:18 pm »
Rebuilt from the ground up.

All new bearings and seals from top to bottom.
Engine rebuilt, top and bottom end. Serco machine work and crank rebuild.
OEM plastics, airbox cover is a nos yellow item with the top section painted white (bottom was painted black standard) Concourse Plastics guards and front plate.
All new cables, Magura levers and throttle, Oury grips
New seat foam and cover
Rewound stator
Wide pegs
Brake pads etc, etc



Photos were taken when the bike was finished, there's some paint off the engine cases now, but that's about all.

$2700



Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: 1979 YZ125F
« Reply #1 on: July 04, 2011, 06:17:36 pm »
 :'( :'( :'( :'( :'( ;D
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Offline bazza

  • Legend
  • *****
  • Posts: 2351
    • View Profile
Re: 1979 YZ125F
« Reply #2 on: July 04, 2011, 06:41:15 pm »
Nice but better if it was a bazza oops i mean beeza
Once you go black  you will never go back - allblacks
Maico - B44 -1976 CR250- 66 Mustang YZF450,RM250
Embrace patina

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Re: 1979 YZ125F
« Reply #3 on: July 04, 2011, 07:37:50 pm »
Harden up Mainline..... tell your missus to get a second job.. Keep your toy..
You'll regret it... :'(
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

Offline foxy999

  • Legend
  • *****
  • Posts: 519
    • View Profile
Re: 1979 YZ125F
« Reply #4 on: July 04, 2011, 09:40:36 pm »
thats cheap,,,,, no i have to many.. maybe .... ok no ,,, nice back yard.  what can i sell.... :-*
My fastest lap is the first one :)

ted

  • Guest
Re: 1979 YZ125F
« Reply #5 on: July 04, 2011, 10:41:56 pm »
What about the price of diesel today

Mick N

  • Guest
Re: 1979 YZ125F
« Reply #6 on: July 05, 2011, 06:49:56 am »
Where in Aus is the bike located?

mainline

  • Guest
Re: 1979 YZ125F
« Reply #7 on: July 05, 2011, 09:16:31 am »
It's in Brisbane

mainline

  • Guest
Re: 1979 YZ125F
« Reply #8 on: July 05, 2011, 05:59:21 pm »
What about the price of diesel today

Watched the True Grit remake on the weekend, pretty good, well worth a look

ted

  • Guest
Re: 1979 YZ125F
« Reply #9 on: July 05, 2011, 06:30:02 pm »
I`m tossing up which `79 to buy. Yours or the project bike. Prob go with the project. Figure it will be easier to start even though it doesn`t have a kickstarter...haha

Offline oldyzman

  • Legend
  • *****
  • Posts: 2187
  • 250 two stroke!
    • View Profile
Re: 1979 YZ125F
« Reply #10 on: July 05, 2011, 07:46:57 pm »
That really is a nice unit....
Brett
I have a soft spot japanese mxers with aluminium tanks. Two stroke classic Dirt Track...

mainline

  • Guest
Re: 1979 YZ125F
« Reply #11 on: July 05, 2011, 07:48:24 pm »
I`m tossing up which `79 to buy. Yours or the project bike. Prob go with the project. Figure it will be easier to start even though it doesn`t have a kickstarter...haha

$10K for you Ted, it's worth more than that in parts and labour ;D

ted

  • Guest
Re: 1979 YZ125F
« Reply #12 on: July 05, 2011, 07:50:38 pm »
Walshy told me about your labour

mainline

  • Guest
Re: 1979 YZ125F
« Reply #13 on: July 05, 2011, 07:51:21 pm »
Ok, $600 then

mainline

  • Guest
Re: 1979 YZ125F
« Reply #14 on: July 05, 2011, 07:54:16 pm »
forgot to mention the shock was rebuilt too, and obviously the forks.