Author Topic: Parts from England  (Read 4472 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Parts from England
« on: June 16, 2011, 09:44:25 am »
I had some trouble with the HVA-Factory mob in England not sending parts and not replying to emails a while back.
Ended up getting the stuff after making a pain of myself and have never been back.
Was at CD8 talking to a bunch of Husqvarna loving mates  and one mentioned that he,d been waiting over a month for parts ordered and paid for from HVA. :o
It usually takes 2 weeks to get stuff out of England.
Their new policy is a minimum order from Aus of 100 pound , so not getting the parts can hurt.
If you are buying bits off this mob take care and only pay with paypal then you might get something .
Good Luck.
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline Huskydoggg

  • Novice
  • *
  • Posts: 13
    • View Profile
Re: Parts from England
« Reply #1 on: June 17, 2011, 02:31:12 pm »
On Husky forums around the world there are people reporting that they've been ripped off by HVA factory. Personally, I lost over $1000 to these crooks.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Parts from England
« Reply #2 on: June 17, 2011, 03:39:37 pm »
you need to get people on the ground to go in the shop and buy the stuff over the counter for you to stop this kind of issue.
« Last Edit: June 17, 2011, 04:26:15 pm by Freakshow »
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

mxfool

  • Guest
Re: Parts from England
« Reply #3 on: June 17, 2011, 04:15:42 pm »
HI all Huskdoggg made a good point he like myself are sick to death these scumbags ripping us off with dodgy stock or not at all this forum has a lot of members and the visitors included that is a hell of a lot of buying power and as a collective we should not tolerate this crap

we need to start a catagory for good places to buy items like ebay finds, fotos, for example and every one can recommend a good trader and if they are make specific eg honda state that, or if they do i bit of everything say that aswell ,there is no reason for us to throw away our money these people need us so i ask the administarer can you add a catagory like this cause in this format it will always be there to reference unlike normal posts that are out of view in a couple of days

mxfool

Offline pancho

  • Legend
  • *****
  • Posts: 2375
    • View Profile
Re: Parts from England
« Reply #4 on: June 17, 2011, 05:32:18 pm »
 For instance a special subject marked 'Recomended suppliers New Parts' with a facility for adding or removing traders as deemed necessary. ??
  Or perhaps a buyers rating system?
 cheers pancho.
  PS Might cause probs.
dont follow me i'm probably off line!

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Parts from England
« Reply #5 on: June 17, 2011, 05:52:58 pm »
What about under each makes board eg Husky, suz, yam etc have a thread titled 'recommended/trusted suppliers' then make it a 'sticky' so it stays at the top of each bike board and then people can just add to that thread. Making it a sticky ensures it doesnt get lost after a few weeks which is what we did before. The thread starter can make it a sticky, there is a button for that somewhere. Then you wont always have newbies asking where to get stuff and they can just read through that thread.
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline VMX247

  • Megastar
  • *******
  • Posts: 8766
  • Western Australia
    • View Profile
Re: Parts from England
« Reply #6 on: June 17, 2011, 07:08:39 pm »
What about under each makes board eg Husky, suz, yam etc have ONE thread titled 'recommended/trusted suppliers' then make it a 'sticky' so it stays at the top of each bike board and then people can just add to that thread.

Thats it !! easy !! .......or it may end up being like the ride places in each state and not fully utilized.
cheers A
Best is in the West !!

Offline mick25

  • Legend
  • *****
  • Posts: 1162
  • Hunter valley NSW
    • View Profile
Re: Parts from England
« Reply #7 on: June 17, 2011, 07:46:05 pm »
A mate of mine has had to orders from HVA husky in pom pom land and lucky never got riped off..
But the owner of the business never returns emails bit slack alright..
On another hand all the bits i have got through ebay in the USA have been great, always friendly and helpful and never been riped off
TOP GUYS TO DEAL WITH THUMBS UP FROM ME  8)

Offline Dewy123

  • C-Grade
  • **
  • Posts: 66
    • View Profile
Re: Parts from England
« Reply #8 on: July 08, 2011, 02:14:57 am »
Ah so i'm not the only one, I've sent an email asking for bits for my 82 WR430 to HVA and Vintage Husky and got nothing back? There's no way i'm going to spend my hard earned with someone who can't be bothered replying emails. The sticky subject for reliable and good parts sources sounds like a great idea. So were can i get bits for my bike? Cheers Dewy


Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
« Last Edit: July 08, 2011, 08:46:00 am by LWC82PE »
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Re: Parts from England
« Reply #10 on: July 08, 2011, 08:49:17 am »
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline scott

  • Novice
  • *
  • Posts: 40
    • View Profile
Re: Parts from England
« Reply #11 on: July 08, 2011, 08:52:28 am »
Hi mike , I have had great success with .  Www.hallscycles.com   Huge old parts inventory                
                                                          
                                                          [email protected].  ( Chris Nichols )

                                                          [email protected]

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Re: Parts from England
« Reply #12 on: September 01, 2011, 07:46:36 am »
Just a follow up on the original post.
Remembered last week to ask my mate if he had received his parts.
Apparently they are on their way. ??? ???
I wonder if he will get them and how long  he has been waiting now ?
I know he ordered them for CD8. :o
Sounded upset. ;D
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.