« previous next »
Pages: [1]   Go Down

Author Topic: Shocker bushes need some @ 12mm not the normal 10mm  (Read 3532 times)

0 Members and 1 Guest are viewing this topic.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Shocker bushes need some @ 12mm not the normal 10mm
« on: May 10, 2012, 11:21:29 am »
Need 2 or more shocker bushes for a CR 125 or 250 shocks top mount.   

From best i can tell with the measuring stick is they have an Eye diameter of 21.30mm ID ( not sure what that makes the bush ID but must be close to same ) being about 16.20mm wide -  with the original bush eye itself being about 18-19mm wide but assume i can cut it if too wide.
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #1 on: May 10, 2012, 05:11:59 pm »
Try a car shock specialist Freaky , I picked up some 10, 12 and 13mm bushes with and without steel insert for $2.50 each. Cheers
Logged
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #2 on: May 11, 2012, 12:18:57 am »
What sort of car shock place ? like a no bull one or whats the retail name for the one you got into ?
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #3 on: May 11, 2012, 11:23:58 pm »
Was previous local no bull one , has new fancy franchise owners and store now ,not knowing what their like myself but had some ho hum reports hence not naming them first up Freaky.
Logged
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #4 on: May 13, 2012, 08:51:09 pm »
do they still have the steel inserts in them still ?
« Last Edit: May 13, 2012, 08:53:59 pm by Freakshow »
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #5 on: May 14, 2012, 01:21:49 pm »
How much walter as per spec's above to fit into that Honda CR shock mount?  and if so... can you post some out.  Refundable if they dont fit in ?
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #6 on: May 14, 2012, 02:38:03 pm »
Yes steel in or without steel. Still  the Sus Shop( :D) is local for you and appears to have a good selection., take a sample and be happy. Cheers
Logged
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

oldfart

  • Guest
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #7 on: May 14, 2012, 03:03:14 pm »
This is where I  source my bushes from ;) ;)
http://www.polytuff.com.au/
Logged

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #8 on: May 14, 2012, 04:24:57 pm »
One day I was desperate for a shock bush to replace a flogged out on an old Works shock so I went behind my local Selbys Suspension shop on a Sunday morning and scooped 8 old 10 car shockies with good bushes out of their skip bin. I'm still using them!
Logged
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #9 on: May 15, 2012, 02:27:23 pm »
yes i just though the 21.30 part was a funny size ? i have nothing in about 10 brands of shocks that comes close... plus i need the 12mm and the steel insert is too tough for me to even drill wider......
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

oldfart

  • Guest
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #10 on: May 15, 2012, 04:14:44 pm »
Kerry, they are a piece of piss to make , do you have access to a lathe or know of someone local whom owes you a favour ;)    As you buy the "poly tuff "   .... shackle bush ( JX  30mm OD x 30W x 12.3 ID )  trim it up to size and turn up a internal bush.
Logged

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #11 on: May 15, 2012, 05:06:08 pm »
OK where does the poly tuff come from CBC ?
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

oldfart

  • Guest
Re: Shocker bushes need some @ 12mm not the normal 10mm
« Reply #12 on: May 15, 2012, 06:25:56 pm »
look back a couple of posts  ... they cost $2-50 each to buy

Rm Exhaust mount redone ....
Logged
Pages: [1]   Go Up
« previous next »