« previous next »
Pages: [1]   Go Down

Author Topic: Ohlins Shock Tools  (Read 2385 times)

0 Members and 1 Guest are viewing this topic.

Ji Gantor

  • Guest
Ohlins Shock Tools
« on: October 27, 2009, 11:38:20 pm »
Ohlins shocks service tools.

Ji
Logged

Ji Gantor

  • Guest
Re: Ohlins Shock Tools
« Reply #1 on: October 28, 2009, 09:17:01 am »
I would like to purchase all tools required to service piggy back gas/oil shocks.


Ji
Logged

Ji Gantor

  • Guest
Re: Ohlins Shock Tools
« Reply #2 on: October 28, 2009, 09:31:38 am »
Where would one purchase said tools.

Ji
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Ohlins Shock Tools
« Reply #3 on: October 28, 2009, 09:54:42 am »
I have these 2 for sale. Brand new, never used. 2 pin tool fits TT44 shocks and MX USD front fork caps and 51mm reservoir clamping sleeve fits all twins and most singles. They are genuine Ohlins tools. They are pretty expensive, but very good. Its cheaper if you can make your own.

« Last Edit: October 28, 2009, 09:59:08 am by LWC82PE »
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Ji Gantor

  • Guest
Re: Ohlins Shock Tools
« Reply #4 on: October 28, 2009, 09:57:15 am »
Hi  LWC82PE,
What does the two pin thingy do?
My shocks are 36mm diameter res.

Ji
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Ohlins Shock Tools
« Reply #5 on: October 28, 2009, 10:02:03 am »
The pin tool is only for later shocks/forks for undoing caps with 2 pins. The 51mm clamp is for the gold alloy reservoirs which measure 51mm OD with 44mm internal piston.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Ji Gantor

  • Guest
Re: Ohlins Shock Tools
« Reply #6 on: October 28, 2009, 10:11:15 am »
Thanks LWC82PE,
So these two tools will not work on my shocks, Pitty.

Ji
Logged
Pages: [1]   Go Up
« previous next »