OzVMX Forum
Marketplace => Dealers => Topic started by: 090 on August 24, 2007, 06:52:27 pm
-
Hi all, i went and bought a lot of plastics from wreckers/bike shop that are down sizing their wreckers side of things. If you are looking for something PM me and i will see if i have something for you.About $10 an item or less for multiple. 99% Jap. stuff. Cheers,Brad.
(http://img.villagephotos.com/p/2007-5/1259377/IMG_1945.JPG)
(http://img.villagephotos.com/p/2007-5/1259377/IMG_1946.JPG)
(http://img.villagephotos.com/p/2007-5/1259377/IMG_1949.JPG)
What have i done ::)
-
Ok looks like i'm first up 090.
i need a good tidy 1985 CR500 RF Right Hand side radiator shroud.
-
Anything white, YZ and 1981/1982 will be handsomely rewarded. ;) At 10 bucks an item it looks like you'll have enough there to retire Brad ;D ;D ;D
Cheers
-
Ha Ha, i reckon they will bury me in a coffin made from the ones i will never sell!
-
Holy snappin duck shit .... and I thought I was being greedy filling the ute up with PE shit :D ;D
-
LOL, still went back for more as i had to sit somewhere!
-
HOw early ?
-
where the bins still full of motors ::)
-
Yeah,i saved 2. Such a shame. Wanted to buy that stuff but he could get like $1100 a bin as scrap. Can't compete with that. Thanks for the heads up.
HOw early ?
Do you mean before i die? Or how far back do the plastics go?
-
Hmmm . One wonders how he aint heard of Ebay. $10 a bottom end $5 a barrel. $10 a head start price. Has got to be worthwhile and better than scrap value.. I hope he floggs it to someone who will recycle the bits and not melt them .
Hmm perhaps i can do him a deal with listing them on ebay or a web page? i hate wasting anything.
-
I still despair at the losses over here in Perth, Warwicks wheels, Cycle salvage, Bike busters, Two wheel wreckers, Traffic motorcycle, Mundaring motorcycles all their stock gone for scrap, carted away and melted into god knows what.
When I arrived in Perth there were more than 10 wreckers and now there are but 4, One for modern dirt bikes, one for big road bikes (mostly), one for a mixed bag (Two wheel wreckers) and one just starting up that specialises in old stuff but has limited stock. Perhaps a little note from various clubs to these places that their members might be willing to buy a LOT more stuff if the wrecker is having a shed clearence sale and could provide an equally lucrative response born of the need to preserve rare or soon-to-be rare parts.
-
Sorting/ebaying is all too hard for him. Lets face it,there is a shit load of time that has to be sent sorting etc. Spent hours myself just sorting plastics into makes, let alone categorizing
-
in the mid 80's the wrecker I worked at for a short period had a clean up much the same. Bins and bins and bins full of anything and everything alloy that was made in the 60's and 70's went to a place called Brisbane Lace and Gates to be melted down and the rest went to the dump to be burried!!!! about 20 Dodge ute loads from memory! :o when I think back, I was partially responsible for filling the bins! as with all great f*ckup's throughout history, it was all done with the best intentions :'(
Brad I be looking for a 77/78 RM80 right cover and a pair for the '78 JR50 if you spot anything with these details scrawled on them :)
-
any yzj plastics 82 models im only missing two bikes from the series (125,490) now so any plastics would help
-
any yz250gh 80 81 model front number plates.... ;D ;D ;D
-
I know the owner and You can rest assure he has keep all the GOOD PARTS the bin was full off every thing that he had 4 or more of . The Shed clearance was well advertised for over a year .
Yes they are going to be crushed for the alloy and steel parts removed
As a matter of interest 2 months ago 2 bin loads of frames where cut up for scrap .
I pondered over buying his stock then ,but as 090 has mentioned the time required to put an ebay sight together far out weighed the capital outlay.
-
I could do with a right hand side cover for a 1984 XT600 Yamaha. Any hope?? Darcy :)
-
I'm after both sidecovers for 81 XT 500 thanks. I assume all XT sidecovers were the same except paint?
-
as with all great f*ckup's throughout history, it was all done with the best intentions :'(
Don't worry, its only made what left that much more valuable ;D
-
This is my shopping list if you can help me out with , YZ400E, Gaurds ,Tank, sidecover, IT465H, sidecovers,Gaurds,IT headlght shrouds H & K . Cash only direct to your bank thanks Hilly
-
Hi,
I am after any plastics for IT490, particularly Left side cover after Bulahdelah last weekend, and any for a YZ125F.
-
thank god you all ride crappy slow horrible white yellow and green bikes that leaves all the good red bits to me
-
Speaking of red bits i need a rear guard for a Cr250m2. Darcy
-
Brad,
Are you starting to think you created a monster yet ?? ;D ;D
Cheers
T.J.B
-
Im looking for any plastics for IT 490 1984..cheers
-
hi wondering if you have a honda cr500 84 left hand side air scoop ;D cheers
-
hi wondering if you have a honda cr500 84 left hand side air scoop ;D cheers
Here's what you need
http://cgi.ebay.com/ebaymotors/NEW-1984-HONDA-CR500-CR-500-AIR-SHROUDS_W0QQcmdZViewItemQQcategoryZ35584QQihZ005QQitemZ150138046817
-
Hi GodCycle
looking for 1984 YZ 250/490 left side cover and/or airbox cover.
KR
Cammos
-
I will check but am pretty sure i have a set of lightly scratched new ones (aftermarket) . Same as DC plastics ones.
-
What about a rear guard for a PE175C/N? Any yellow brush guards? PM me if so!
Thanks
Tex
-
I will check but am pretty sure i have a set of lightly scratched new ones (aftermarket) . Same as DC plastics ones.
are you speaking of my post on the yz 490? if so, can you send foto's when you have time
-
No sorry, i was talking about cr500'84 shrouds
-
Hi there. I was wandering if you had any plastics to suit an IT 490..Cheers
-
Hi Gwedo, no sorry i had a heap of it stuff but all sold.
Cheers,Brad
-
this is the second hand plastics police here need to check your licence number
had a complaint about illegal trading ::)
while i have got you have you got a reed valve maico 490 barrel i will give you 500 bucks ;)
it ran last time i started it ;D i think
-
A barrel wont do you any good friend, as you will need alot more than that to get those kwaka's going. ;)
Ah choo...oh yuck, a baby kwaka just shot outta my nose. ;D Shouldnt bag them too much,as i got one coming!
-
do you want to sell that one i know someone chasing one ;D do you like my new factory kx
looks like i am going to get her will give you a ride when i get it 8)
-
Everythings for sale for the right price ;) You wont have to ask me twice to take that beast for a run!
-
hey brad it turned up today still walking around with a fat :P
-
Cant wait to see it in action. Good on ya!
-
I know this is a bit late for a joke but if you what to see back door buddies fat you will need to go to another website!! LOL x2
Shane
-
Any 83 kx 250 or 500 parts would be happpy to buy
-
any 81/82 CR125 plastics ?
-
I think so mate. I will check and get back to you
-
hi
any 1976 honda cr250 plastics or 78-80 cr250 side plates
cheers
jimg
-
hi
have you got a left hand rm125m/s sidecover and front and back guards?
TT5 Matt
-
May have sidecover. Are they the same as 250 of the same year? No guards though.
-
On the hunt for a XR 250R 1982 rear guard for a local old guy who is rebuilding or restoring one as far as i can tell from his phone call.
HE is adament its a big long reg guard not unlike a front guard. its the first prolink model or somthing and all the model after it where short ones. I had the 84 and 85 model and i remember them as being sort of square > he seems to think these ones are long and rounder.
I have nor idea but do you have one ?
part number stamped on the underneath is 80100-mao-0000
-
Is it this style?...
-
PRobly. i had a riding mate who had one of those and it seemd really skinny and had weird forks compared to the Blue seat model i had, thats all i remember, if thats an 82, i guess thats the rear then.
-
I dont have any, sorry.
-
G'day would you have any DT 175 81 side covers or front guard
-
Is it this style?...
Les at mainly maico has just got these in, I don't know who makes them but I would presume it is DC
-
I do have some DT stuff, later model for sure. Can you show me a pic?
-
i would send you pictures , but i can not work out how to send such small kb ones 128 max, so i guess its a no.
-
Give me a few days and i will pull out the side covers that i think will do the job and take photos. You can put you're photos on a host site like village photos and post here as well.
-
G'day, have you got any front or rear gaurds to suit 1975 XR
-
No sir!
-
Do you have any sidecovers for a DT175e 1978?
-
I have a few dt plastics from memory, the problem is i don't know what a dt175e sidecover looks like exactly. Can you show me?
-
I have a few dt plastics from memory, the problem is i don't know what a dt175e sidecover looks like exactly. Can you show me?
(http://w3.bikepics.com/pics/2008/03/05/bikepics-1206110-full.jpg)
-
(http://w3.bikepics.com/pics/2008/01/26/bikepics-1161418-full.jpg)
-
Good one cyclegod. I have definitely have some of those. Now i need to get home in daylight and find them.
-
Hi,
Do you have any CR250 / CR500 88-89 bits??
also chasing XL600RD sidecovers (red)
Thanks
Mick
-
(http://img.villagephotos.com/p/2007-5/1259377/PB130004.JPG)
Some DT stuff in there.
As far as CR stuff, i probably have shrouds as i have a fair bit of red plastics. I will have a look for side covers for xl600.
-
Brad the yellow ones with "200 monocross "are AG200 fit all models of Yamaha AG200 up till today, Other yellow DT400 , Half pictured white with yellow, black and blue thin stripes XT250 two valve, all others as marked ;) Cheers Tim
-
would you have some side covers for a dr100
-
Anything for a 1982 Honda CR250 ?????
Cheers
James
-
Hi Caps, i dont think i have. I will take a photo of what i found but i dont think they are correct.
James, i have side covers for an 82 250. $10 each. I will send you some pics if you are interested.
-
sweet no probs
-
Sorry about the delay in replying. PM sent.
Cheers
James
-
Hi mate, Im looking for side covers for a 1982 pe175 and the front number plate (above headlight).
Cheers
Ben
-
I have one side plate for a pe175, year unknown to me . I shall take a photo tomorrow and post here.
-
Any good to you?
(http://img.villagephotos.com/p/2007-5/1259377/P1060003.JPG)
-
Hi Brad do you have the plastic that goes above headlight of a mx 100 around 84 in red thanks Michael. :)
-
also interested in plastics or anything pe thanks again Michael.
-
I dont think so but i also dont know what it looks like. Do you have a photo of one?
-
cant seem to find a picture should be red and black a little like a pe shape came on the dt100 aswell i also need speedo and taillight thanks Michael.
-
looking for honda cr125r plastic jus let me know what you got
-
Going by your other post, you are looking for 83 cr125 plastics?
If you are i should have side covers and radiator shrouds .
-
Also for others wanting to know if i have any other plastics, i have pretty well got rid of everything except for cr stuff.
-
i have a good 83 cr125 tank and i think tank shrouds here
cheers Ian
-
090,any front and rear guards for an 1988 CR500?
Cheers,Mark.
-
I have a front guard off an 85 but its faded. Cant help with a rear.
-
No sweat.Like to get something closer to year model I own.
090,thought I'd throw it out there,and see what you had left from that big pile.
I take my hat off to for the effort you've put into sorting and identify all those plastics.
Cheers,Mark.
-
G'day mate.
would you have any 80,83 XT250 side covers?
-
I had a gut full of them and pretty much threw them all out. If I have some I will report back.
-
Any yz 250,465 tanks?
-
All plastics are gone, sorry.
-
Strewth. :o