Author Topic: Pe 250 flywheel (80) (Read 2266 times)

Eza · « **on:** September 23, 2009, 12:52:35 pm »

Have been trying to get one for ages unless someone has flywheel and stator off another pe.

Thanks.

cyclegod · « **Reply #1 on:** September 23, 2009, 01:16:55 pm »

Try here...http://www.cmsnl.com/suzuki-rs250-1980-1981-usa_model16225/partslist/90877.html

It's not cheap, but if you ask US wreckers for a stator and flywheel from a Suzuki RS250 (made in 80-81 and same part numbers as the PE) you might get lucky.

http://www.bikeboneyard.com/80%20pe-250.html

sudman · « **Reply #2 on:** September 23, 2009, 05:36:13 pm »

PE 175 fits as well, works good with 175 cdi makes it rev to the moon

LWC82PE · « **Reply #3 on:** September 23, 2009, 07:18:46 pm »

any other PE stator/flywheel (matched pair) will work, you just gotta move the timing slots 90 degrees.

TT5 Matt · « **Reply #4 on:** September 25, 2009, 08:52:17 pm »

PE 175 fits as well, works good with 175 cdi makes it rev to the moon

hi sudman
whichmodel pe175 stator/rotor goes into the t/t pe250?

LWC82PE · « **Reply #5 on:** September 25, 2009, 09:21:50 pm »

Any 78-84. Need to make new slots in backing plate at 90 deg.

sudman · « **Reply #6 on:** September 29, 2009, 05:55:57 am »

I have a 1980 pe175 t flywheel stator & CDI on my one

OzVMX Forum