ebay goodies

[LWC82PE]

http://cgi.ebay.com/ebaymotors/SUZUKI-TS-185-NOS-CYLINDER_W0QQitemZ320174947655QQihZ011QQcategoryZ35595QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/1978-SUZUKI-RM-100-FORK-SKINS_W0QQitemZ320174944007QQihZ011QQcategoryZ35592QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[pokey]

Hmmmm. better price than the NOS barrel i seen for circa 150 US. hmmmmmm  65.0278 AUD plus postage  Hmmmmm

[LWC82PE]

i thought you'd be interested

[Mark Austin]

How about this lot ??

http://cgi.ebay.com.au/Suzuki-KT120-1968-model-vintage-Japanese-bikes-3_W0QQitemZ290175380384QQihZ019QQcategoryZ102690QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Doc]

I reckon Ian over in WA that just scored the B100 could go that lot..least they are semi-VMX  shitta's maybe and call me completely mad but I'd snap am' up in a flash if I lived in Utopia where I had the space, time, money and the means..you could build an MX'er, a stocker and other morphs into a trials weapon why??  errr..just for the heck of it of course 

[LWC82PE]

this seller had a NOS RM 465 head listed last wk/early this wk. i cant find it now but i dont know if it sold or not
http://stores.ebay.com/robbossrichdick

[LWC82PE]

http://cgi.ebay.com/ebaymotors/1980-RM125-plastic-set-NOS-fenders-side-panels-ahrma_W0QQcmdZViewItemQQcategoryZ35591QQihZ009QQitemZ190170634421QQrdZ1QQsspagenameZWDVW

[LWC82PE]

ive got 3 of these in yellow for $35 AU each if anyone wants them. they are NOS in packet, perfect condition. they were also fitted to many other suzukis, not just the TS400

http://cgi.ebay.com/ebaymotors/SUZUKI-1972-75-TS400-front-fender-flap-NOS-ultra-rare_W0QQcmdZViewItemQQcategoryZ35580QQihZ011QQitemZ320177565765QQrdZ1QQsspagenameZWD1V

[email protected]

[LWC82PE]

heres a good nos webco head
http://cgi.ebay.com/ebaymotors/Suzuki-NOS-Webco-cylinder-head-TS-TC-185-RARE-VINTAGE_W0QQcmdZViewItemQQhashZitem290189552062QQitemZ290189552062

there is also a nos DG TM 100/125 or maybe a early RM 125 head on ebay at the moment too

[cyclegod]

heres a good nos webco head
http://cgi.ebay.com/ebaymotors/Suzuki-NOS-Webco-cylinder-head-TS-TC-185-RARE-VINTAGE_W0QQcmdZViewItemQQhashZitem290189552062QQitemZ290189552062

there is also a nos DG TM 100/125 or maybe a early RM 125 head on ebay at the moment too

That DG head is for TM100 only...http://cgi.ebay.com/ebaymotors/NOS-DG-head-Suzuki-TM100-tm125-tm125-Ahrma-vintage-mx_W0QQcmdZViewItemQQcategoryZ35581QQihZ005QQitemZ150191725772QQrdZ1QQsspagenameZWDVW

[LWC82PE]

ok its good someone knows

[Doc]

take a look at the head bolt holes..TM125 are in a square so to speak, the ebay item has them staggered or offset from square...if ya had a TM100 barrel you may be able to work it..bore it to 56mm 125 piston and  bolt it onto your 125 bottom end..lot of trouble but technically it could fit a 125 

[cyclegod]

take a look at the head bolt holes..TM125 are in a square so to speak, the ebay item has them staggered or offset from square...if ya had a TM100 barrel you may be able to work it..bore it to 56mm 125 piston and  bolt it onto your 125 bottom end..lot of trouble but technically it could fit a 125 

Just put in a long stud, where the short one is near the exhaust port. Thats all the factory did to make a TM125 into a TM100.

[Doc]

Cyclegod, TM100 has the head studs cast in a different pattern to the 125. Externally it appears the same and just a sleeved back bore but it isn't. You'd need to run the 100 barrel to fit the 100 head 

[cyclegod]

Cyclegod, TM100 has the head studs cast in a different pattern to the 125. Externally it appears the same and just a sleeved back bore but it isn't. You'd need to run the 100 barrel to fit the 100 head 

I was talking about the crankcase short stud  , not the single stud that goes in the 125 barrel. Crankcases are the same just a different stud pattern