Still more TM/TS75 bits needed..

[Doc]

I finally got the carb apart for the TS/TM75 after having it soaking for near 2 months     low and behold it's completely rooted due to corrosion and human interference Needless to say I am now hunting a carb to fit a small bore rotary valve engine with the clamp cast onto the carb type spigot mounting. The stock carb is a whopping Mikuni vm16sc but I'd be willing to try any carb if it physically fits the space provided. TS100/TS90 are too big so I'm guessing a carb off an old 2smoke 50, 70 or 80cc yammie, kawa or zooki rotary valved steppy. Pocketbike carbs on ebay are unsuitable also..I already checked  If you have something you may think could work I'd love to know as the bikes not going to run very well without one  email [email protected] or message me here. Thanks

[cyclegod]

Is it this type doc?
http://cgi.ebay.com/ebaymotors/SUZUKI-carburetor-A80-A100-AS100-AFTERMARKET-NOS_W0QQcmdZViewItemQQcategoryZ35597QQihZ014QQitemZ330154552296QQrdZ1QQsspagenameZWDVW

[Doc]

mmm..thanks cyclegod, I have one of those and it's too big..right cable setup, shape and mounting just physically too big..that looks to be a VM19sc big block carberooster 

[LWC82PE]

got plenty of head gaskets if you need some!

[Doc]

thanks Leith but I have the head gasket in stock.
I had it before I had the bike..an omen I believe 

[cyclegod]

Here ya go.....
http://cgi.ebay.com/ebaymotors/Suzuki-TM-75-Carburetor-Assy-Used-Gc-1973_W0QQcmdZViewItemQQcategoryZ35597QQihZ009QQitemZ190168956630QQrdZ1QQsspagenameZWDVW

and he has LOTS more stuff too

[Doc]

beaudy! Thanks cyclegod! I'm onto it 

late edit..carb is now a non issue..

still chasing a sprocket cover