Author Topic: This is sacrilege - Who would do this  (Read 5447 times)

0 Members and 1 Guest are viewing this topic.

mx250

  • Guest
Re: This is sacrilege - Who would do this
« Reply #15 on: March 23, 2009, 07:51:51 pm »
You have got his hopes up now Jared........

"I had this listed as a single auction with the bultaco frame until I found out how rare this motor actually is. I am sure all of you would have done the same and relisted the engine/gearbox with a realistic start price for what it actually is. I still have people telling me that the start price is too low, but I want to be realistic.

This motor is mounted in a 1976 Bultaco Mk9 Pursang frame and you are only bidding on the engine/gearbox [frame is in a seperate listing]

The motor turns over freely and has compression. I have never started this engine nor tried as there is no ignition coil, the kick start lever and gear lever are also missing. I got an sms from a friend saying he may have either a kick start or gear lever for me , if that does turn up then it will be included in the sale.

The longer people sit watching this and not bidding the more chance I have to find out what it is really worth, I just had a reply from South West Montesa in Arizona and I quote here:-

"Only 12 11M's can be accounted for worldwide at this time.  Very rare.  Motor should be worth $1500+  It's the only 4 speed trials motor ever made by Montesa.""

I reckon he's got no hope even at $1000. It's a rare motor, in unknown condition, but is pretty worthless without the rest of the bike.

http://cgi.ebay.com.au/Montesa-11M-Engine-Gearbox-Number-27-of-44-built_W0QQitemZ250394509183QQcmdZViewItemQQptZAU_Motorcycles?hash=item250394509183&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A1318

May the market decide ;D.

Offline cappra

  • Legend
  • *****
  • Posts: 640
  • Glendale, Arizona
    • View Profile
    • Southwest Montesa
Re: This is sacrilege - Who would do this
« Reply #16 on: March 23, 2009, 08:30:07 pm »
I agree.  Without the proper frame and bits, a pretty limited market.  He did
e-mail and said he had a spaniard that had a frame but no motor, so who knows...

360DUDE

  • Guest
Re: This is sacrilege - Who would do this
« Reply #17 on: March 24, 2009, 07:42:08 am »
Jared,
Did those engines have the crank mounted clutch?

Luke

Offline JC

  • Legend
  • *****
  • Posts: 1245
    • View Profile
Re: This is sacrilege - Who would do this
« Reply #18 on: March 24, 2009, 09:30:43 am »
I'm fairly sure they didn't Luke

167 frame butchered to take 4sp Mon engine & rear shocks laid down too far (which causes falling rate suspension not rising rate progression) aint going to be worth much

I still have my 167 bought new from Donny Newell in Aug 76. Rear shocks & lack of up-pipe is about all that let it down.

Offline cappra

  • Legend
  • *****
  • Posts: 640
  • Glendale, Arizona
    • View Profile
    • Southwest Montesa
Re: This is sacrilege - Who would do this
« Reply #19 on: March 24, 2009, 04:39:50 pm »
In the Montesa "modern era" (after 1965) only the early 1976 VA 360's
had the crank mounted clutch. 

albrid-3

  • Guest
Re: This is sacrilege - Who would do this
« Reply #20 on: March 24, 2009, 10:48:07 pm »
well, that montesa m11 engine will be going back to spain, a collector has bought it.

mx250

  • Guest
Re: This is sacrilege - Who would do this
« Reply #21 on: March 25, 2009, 08:10:14 am »
well, that montesa m11 engine will be going back to spain, a collector has bought it.
The power of the internet - buyer and seller of meet ;).

I assume that because the auction finished early it sold for more than $1000 :o. I wonder if the Spanish buyer has the rest of the bike or a good part of it? If he does I suppose he can't believe his luck :). Lets hope a little of Monty's history is coming together and being preserved ;D.

runutz698

  • Guest
Re: This is sacrilege - Who would do this
« Reply #22 on: March 25, 2009, 08:41:08 am »
Hey Got 2500AU for it, sent it to that big collector in spain. Already left the country and is on it's way to spain.

Cheers
Nutz

360DUDE

  • Guest
Re: This is sacrilege - Who would do this
« Reply #23 on: March 25, 2009, 08:50:27 am »
 ;D Man that makes me laugh, good on him
This guy trying to get a few hundred bucks for a bitza made bike, and ends up having on of the rarest motors eva made by montesa!!!
$2500 he's laughen,

Doesn't suprise me it came from Geelong, because of Lyall of course,

mx250

  • Guest
Re: This is sacrilege - Who would do this
« Reply #24 on: March 25, 2009, 09:04:21 am »
$2500 :o :o :o probably broke his neck getting it posted ;D.

Half his luck. This will have him shouting the pub and telling the yarn for years to come ;D.

runutz698

  • Guest
Re: This is sacrilege - Who would do this
« Reply #25 on: March 25, 2009, 10:07:14 am »
The spanish guy got freight company to pick it up from his front door aswell. Lucky Bastard

mx250

  • Guest
Re: This is sacrilege - Who would do this
« Reply #26 on: March 25, 2009, 10:17:16 am »
The spanish guy got freight company to pick it up from his front door aswell. Lucky Bastard
He was keen ;)

Offline maicomc490t

  • Legend
  • *****
  • Posts: 551
    • View Profile
Re: This is sacrilege - Who would do this
« Reply #27 on: March 25, 2009, 11:47:53 am »
That's one funny yarn - now he can afford to buy a new mattress, lol !!!

Good on him - those stories are always good!

Dave Mac  ;D
VAPOUR (AKA HYDRA / HYDRO / AQUA / WET) BLASTING AND GENERAL ENGINEERING 0416074750 (or) [email protected]

DUCATI Parts wanted esp 450 R/T and other early models inc V-twins

BULTACO M49 parts wanted

albrid-3

  • Guest
Re: This is sacrilege - Who would do this
« Reply #28 on: March 28, 2009, 11:49:57 pm »
Gee, l would like to get, 2500 for my brand new cz engine that has never been started.