« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Boysen Link  (Read 9076 times)

0 Members and 1 Guest are viewing this topic.

oldfart

  • Guest
Re: Boysen Link
« Reply #15 on: March 18, 2009, 07:21:11 pm »
Drag cars have had a similar set and achieved the same results .
Logged

Offline asasin

  • Legend
  • *****
  • Posts: 547
    • View Profile
Re: Boysen Link
« Reply #16 on: March 19, 2009, 02:14:42 pm »
If adjusted correctly , would it not stop the weelbase getting longer and shorter during suspension travel ?If you coupled it with a ribi frunt the bike wouls stay the same length at all times?
Logged
If in doubt ,WIND IT OUT

TooFastTim

  • Guest
Re: Boysen Link
« Reply #17 on: March 19, 2009, 02:53:39 pm »
Quote from: Lozza on March 16, 2009, 11:19:58 am
All this assumes there is a 'problem' with chain torque, most manufacturers seem to work with it or put the swingarm pivot as close to the countershaft as possible. These blokes probably don't want to know how moving the pivot point up or down(in relation to the output shaft) is used to dial in squat or anti squat by just about every 125/250/MotoGP/WSS/WSBK/AMA and Australian superbike teams ::)

It's a point and I'd forgotten about it. Yup when you give it the berries the swinging arm tries to pull down and under the bike, locking the suspension. This trick is used extensively by trials riders.
Logged

Offline farmpro

  • C-Grade
  • **
  • Posts: 77
    • View Profile
Re: Boysen Link
« Reply #18 on: March 20, 2009, 01:36:05 pm »
Hey Mates !!!!

The guy that did the development work for Yankee/Ossa was Joe Bolger.He later had a company Joe Bolger Products that sold specialty tools and made some engine mounts for foreign cars that used different mounting holes than originally.They were used when mounting holes were damaged in collisions instead of replacing or welding up the engine blocks.This info. may help if someone wants to do some more research on the subject.
Good Luck.

Bill Davis       Texas Vintage Racing Club & Honorary VMXWA
Logged

TooFastTim

  • Guest
Re: Boysen Link
« Reply #19 on: March 20, 2009, 01:47:28 pm »
Bolger is (was?) a seriously clever bloke. Especially when he sued Suz and won.
Logged

mx250

  • Guest
Re: Boysen Link
« Reply #20 on: March 20, 2009, 02:20:00 pm »
Quote from: farmpro on March 20, 2009, 01:36:05 pm
The guy that did the development work for Yankee/Ossa was Joe Bolger.
Yeah that name rings bells. I described him as an inventor but I remember the article describing him as having a background in lateral thinking and development.
Logged

TooFastTim

  • Guest
Re: Boysen Link
« Reply #21 on: March 20, 2009, 02:28:18 pm »
Logged

Offline ba-02-xr

  • Legend
  • *****
  • Posts: 606
    • View Profile
Re: Boysen Link
« Reply #22 on: March 21, 2009, 08:55:22 am »
This has turned very intereseting & informative. Any outher strange rear suspension set ups people can remember.
Logged

Offline Husky500evo

  • Legend
  • *****
  • Posts: 870
    • View Profile
Re: Boysen Link
« Reply #23 on: March 21, 2009, 10:28:23 am »
How about the jack shaft idea on this CR125 Honda ? I read somewhere that Maico tested a similar set-up on one of their works-bikes .
« Last Edit: March 21, 2009, 04:10:43 pm by Husky500evo »
Logged
Pages: 1 [2]  All   Go Up
« previous next »