« previous next »
Pages: [1]   Go Down

Author Topic: Kick start for 77/78 yz125 or 77/78/79 IT175  (Read 1890 times)

0 Members and 1 Guest are viewing this topic.

Offline grimmi

  • Novice
  • *
  • Posts: 23
    • View Profile
Kick start for 77/78 yz125 or 77/78/79 IT175
« on: September 08, 2019, 08:11:58 am »
Hi all, looking for a kick starter from a 77/78 yz125 or 77/78/79 IT175
Thx
« Last Edit: September 08, 2019, 08:20:09 am by grimmi »
Logged
74 CR125, 77 CR125, 79 CR125, 76 RM125, 80 RM125, 80 YZ125, 80 TT250, 80 XT250, 84 XT250, KTM200EXC

Offline crossedup2

  • B-Grade
  • ***
  • Posts: 249
  • Never enough shed time.....
    • View Profile
Re: Kick start for 77/78 yz125 or 77/78/79 IT175
« Reply #1 on: September 14, 2019, 08:52:35 am »
You will pay big dollars for real a YZ or IT on. There are plenty of DT ones out there. If its the spline part that is gone just pinch that bit off the new DT one. If not then us the whole thing.
I have a IT with the DT one and its fine.

Peter B
Logged
Anything Yamaha. AT1, CT1 (X3), RT1, DT3 (x3), YZ125X,  YZ250E, YZ400D, IT175E, IT250H, XR500RC . Always looking for Pre 78 Yamaha stuff....

Offline grimmi

  • Novice
  • *
  • Posts: 23
    • View Profile
Re: Kick start for 77/78 yz125 or 77/78/79 IT175
« Reply #2 on: September 15, 2019, 07:53:58 pm »
Thanks Peter
Will try that, also looking for foot pegs for the same
Cheers
Logged
74 CR125, 77 CR125, 79 CR125, 76 RM125, 80 RM125, 80 YZ125, 80 TT250, 80 XT250, 84 XT250, KTM200EXC
Pages: [1]   Go Up
« previous next »