Author Topic: QVMX scrutineering  (Read 4317 times)

0 Members and 1 Guest are viewing this topic.

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
QVMX scrutineering
« on: January 16, 2016, 03:45:31 pm »
Got the new (to me) bike in the shed today. '84 RM250. Now need to do the prep for the first meeting next week. It's generally pretty tidy and I've read the tips on scrutineering on the QVMX website but just have a few extra questions someone might be able to help with. Don't want to get to the track and be unable to ride due to something that could have been an easy fix..............

1. Chain tension - any general requirements?  A loose chain is a happy chain as the saying goes but it obviously could be a safety issue if its too loose.
2. Front sprocket guard - Required? If so I'll fab something up as a week out it might be push to get one. Thinking ally or plastic cut and shaped and mounted with spacers.
3. Upper fork gaiters/boots? Required? Will definitely be replacing them but maybe not this week given time constraints.
4. Have a new adventure helmet (AS1698) but it has a flip up visor. Will remove the visor for racing. Any issues?

Thanks.

Tony
#66 - Fat Snail Racing.

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: QVMX scrutineering
« Reply #1 on: January 16, 2016, 07:12:34 pm »
Sounds reasonably ready if those are your only concerns.

Chain should be adjusted as per OEM spec. They are not supposed to run loose. Should find info from Suzuki forums on the web or ask on the Suzuki forum guys here. If chain is way loose then check sprocket tooth wear also as they may be toast - as may the chain be.

Front sprocket guard is required. Fabricate something or purchase the OEM part from eBay or elsewhere. Try Suzuki shop as you never know..... 8)

Fork gaiters are not required

Helmet needs to comply with the list of standards listed in MA MOMS.  AS1698 I'd included. Visor removed and run googles in certainly the go unless you are going to do over 100km!

Well done on asking ahead of time. As you say it could save grief.

See you there next weekend all going well  :D
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
Re: QVMX scrutineering
« Reply #2 on: January 16, 2016, 10:12:20 pm »
Champion thanks mate.

T.
#66 - Fat Snail Racing.

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: QVMX scrutineering
« Reply #3 on: January 17, 2016, 11:48:14 am »
Got the new (to me) bike in the shed today. '84 RM250. Now need to do the prep for the first meeting next week. It's generally pretty tidy and I've read the tips on scrutineering on the QVMX website but just have a few extra questions someone might be able to help with. Don't want to get to the track and be unable to ride due to something that could have been an easy fix..............

1. Chain tension - any general requirements?  A loose chain is a happy chain as the saying goes but it obviously could be a safety issue if its too loose.
2. Front sprocket guard - Required? If so I'll fab something up as a week out it might be push to get one. Thinking ally or plastic cut and shaped and mounted with spacers.
3. Upper fork gaiters/boots? Required? Will definitely be replacing them but maybe not this week given time constraints.
4. Have a new adventure helmet (AS1698) but it has a flip up visor. Will remove the visor for racing. Any issues?

Thanks.

Tony

OK

Next weekend is not a race day so no scrutineering, however good time to check that everything will be ok for first race day.

1.  Chain tension is not necessarily a scrutineering check, however if something was a mile out something would be said.
2.  Front sprocket cover is required.  If you can make one for next weekend great, but won't be sent home if you haven't got one.
3.  Fork gaiters are not required
4.  As long as the helmet as AS 1698 and is in good condition it will pass.  No need to remove visor but it will look better using googles.

Again Sat & Sun is practice day feel free to ask questions.
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
Re: QVMX scrutineering
« Reply #4 on: January 17, 2016, 07:27:59 pm »
Thanks mate. Most of it is done now so I think I'm good to go. Bit of running around this weekend but I guess hours chasing bits is also bike prep! More annoying doing the rounds of the shops than sitting in the shed with a beer but.
#66 - Fat Snail Racing.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: QVMX scrutineering
« Reply #5 on: January 18, 2016, 02:29:30 pm »
Last time i looked at the new MOMS only one cover was required now, IIRC  front spockets are no longer required, but the one to the rear chain where it ffeds into the sprocket is required
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
Re: QVMX scrutineering
« Reply #6 on: January 18, 2016, 04:03:33 pm »
May need to have another look. I think it is the other way around.. Countershaft cover is required.. rear in now not..!

Offline GD66

  • Legend
  • *****
  • Posts: 1109
    • View Profile
Re: QVMX scrutineering
« Reply #7 on: January 18, 2016, 04:37:35 pm »
Roger that. Two years of arguments for nothing...

Are you not a commish, Freaky ?
Nostalgia's not what it used to be....

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: QVMX scrutineering
« Reply #8 on: January 19, 2016, 06:48:29 pm »
Last time i looked at the new MOMS only one cover was required now, IIRC  front spockets are no longer required, but the one to the rear chain where it ffeds into the sprocket is required

WRONG !!!!!  The MoMS for each class says "Countershaft covers will be fitted"
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
Re: QVMX scrutineering
« Reply #9 on: January 19, 2016, 07:06:36 pm »
stop yelling.. look at post 2 above.. ;D

Offline foxy999

  • Legend
  • *****
  • Posts: 519
    • View Profile
Re: QVMX scrutineering
« Reply #10 on: January 19, 2016, 08:33:06 pm »
Plenty of time to get it sorted .

2016 Club Events







Dates
Event
Track   Downloads
Special Instructions
23-24 Jan
Club Practice Weekend
Biddaddaba
 Event Details
Camping and food van available
13-14 Feb
Club Sign-on and Practice Weekend
Biddaddaba


12 Mar (Sat)
Club Practice Day (racing on Sunday)
Biddaddaba

 
13 Mar (Sun)
Club Race Day
Biddaddaba


03 Apr (Sun)
Club Championship Round 1
Coles Creek

Cannot drop points for this meeting.
16-17 Apr
Club Practice Weekend
Biddaddaba


21 May (Sat)
Club Practice Day (racing on Sunday)
Biddaddaba


22 May (Sun)
Club Race Day
Biddaddaba       
26 Jun (Sun)
Club Championship Round 2
QLD Moto Park       
16 Jul (Sat)
Club Practice day
Biddaddaba       
17 Jul (Sun)
Club Championship Round 3
Biddaddaba       
05-07 Aug
Conondale Classics
Green Park       
10 Sep (Sat)
Club Practice day (racing on Sunday)
Biddaddaba       
11 Sep (Sun)
Club Championship Round 4
Biddaddaba       
01-03 Oct
VMX State of Origin (QVMX and Heaven)
Port Macquarie       
23 Oct
Club Championship Round 5
QLD Moto Park       
12-13 Nov
Club practice weekend / AGM / Presentations
Biddaddaba       
                
* Camping and food van is available at most of our tracks and weekend meetings.
    
 Print or Save Calendar
        
                

 
 
My fastest lap is the first one :)