WTF ??

[YUMASTEPSIDE]

.....just picked this up from a bloke, it appears to be an '84 KTM roller with an XL185 motor. It has a cable that runs from the rear brake, around in front of the motor, to a gear lever with a bolt through it, welded to the frame for a rear brake pedal    The frame has been butchered beyond repair but the motor could prove quite interesting.....apparently it has a CR Elsinore internal rotor and stator fitted, the ignition side of the cam has been cut off and it runs a CR CDI. 
It also has what appears to be an oil feed line running from the top of the cases to the head........more info and pics when I pull it apart.............

                           

                               Roger

[YUMASTEPSIDE]

...............feed pipe ??

                     

                       Roger

..........better not post this on the KTM threads, I'll have all the KTM owners outside my door with lit torches and pitchforks 

[Tim754]

 Um Cute? pickup Roger. I too would love to see what's what with that  ahh   engineering. Cheers Tim754

[Simo63]

Saw that on Facebook yesterday. He said he was keeping the motor and selling the roller. Must have changed his mind?

[mick25]

I have been told about this combo before but I think it was a xr200 in a ktm frame he said it was a fun bike to ride , if my memory is right

[oz555ktm]

 How can they do that to a KTM 

 the Boys are on the way .. No KTM will be left behind ...

  I think is a 125 fram I wll get back to you .. 550mm long swing arm

[YUMASTEPSIDE]

.......pretty right Simo, he wanted the motor for his daughters bike, but after I showed him that half the guts were missing from the motor, I swapped him a standard XL185 motor for what you see here.....this motor is only an XL185 not an XR200....and he only just got it from someone else and has never had it running 

                              Roger

......have you been into my photobucket Dennis ??........and, NO, you can't have my GS400 

[Nathan S]

 How can they do that to a KTM 

Just what you've got to do if you want a KTM that runs for more than ten minutes between rebuilds.

[brent j]

I have been told about this combo before but I think it was a xr200 in a ktm frame he said it was a fun bike to ride , if my memory is right

Kia ora bro,
That was my bike, XR200 in a 1990 KTM 250 endure frame with Honda body work. nice to ride.

[Tim754]

If it was yours Brent that adds a heap of credibility the the machine.

[oz555ktm]

Kia ora bro,
That was my bike, XR200 in a 1990 KTM 250 endure frame with Honda body work. nice to ride.
[/quote]

 it mite not Be thats a 1983/4 frame   not a 1990 ..

  some one may have copyed your old Bike

   How did it Go I Think it would have been a Very Good Vinduro Bike ..

[YUMASTEPSIDE]

Sorry Brent, this ones an '84 with 185 motor.............and knowing your workmanship, this is no where near your standards.
  Whoever built this one had his striped apron on..........its well and truly butchered  :'(

                            Roger

[brent j]

Sorry I should have been a bit clearer in my reply.

I think Mick25 was referring to my "KTonda in his post. That was an XR200 motor in a KTM frame.


I've reformed now and own a genuine KTM

[Tim754]

I've reformed now and own a genuine Honda...

[YUMASTEPSIDE]

?......Im not, I've got all three.....Honda, KTM andHonda/KTM   

                        Roger