Author Topic: Wanted Lights/Tail light 79 WR250  (Read 2507 times)

0 Members and 1 Guest are viewing this topic.

Offline Tossa

  • Legend
  • *****
  • Posts: 2087
    • View Profile
Wanted Lights/Tail light 79 WR250
« on: December 02, 2014, 05:07:43 pm »
Looking for the complete wiring loops , lights and fittings for both headlight and brake light.   Looking to get a B class licence for the bike over here in the west
1973 Rickman Zundapp Metisse, to rebuild
1979 Husqvarna WR250
1974 Husqvarna MAG CR250

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: Wanted Lights/Tail light 79 WR250
« Reply #1 on: December 02, 2014, 09:34:08 pm »
try café husky or husqvarnaparts.com or jsu get some whire from the auto shop and poke it about behind the headlight and down to the taillight, I just used a ty Yamaha tailight

Offline Tossa

  • Legend
  • *****
  • Posts: 2087
    • View Profile
Re: Wanted Lights/Tail light 79 WR250
« Reply #2 on: December 02, 2014, 09:52:22 pm »
try café husky or husqvarnaparts.com or jsu get some whire from the auto shop and poke it about behind the headlight and down to the taillight, I just used a ty Yamaha tailight

Thanks for that, wondering about using other lights
1973 Rickman Zundapp Metisse, to rebuild
1979 Husqvarna WR250
1974 Husqvarna MAG CR250

Offline grouty

  • A-Grade
  • ****
  • Posts: 363
    • View Profile
Re: Wanted Lights/Tail light 79 WR250
« Reply #3 on: December 03, 2014, 06:07:38 am »
What rear mudguard have you got ?
At present I use the original motocross one. My 78 390WR has a TY replica light and rubber plate holder, the 390 Auto has a Bresica rubber flap with original 79 WR large round tail light. Good luck with finding a 79/80 headlight ! Fairly rare. Make sure if you do buy one it has the headlamp bulb holder. The Auteroche holders were unique to Husky. A TY lamp works well or a Preston Petty unit.

If you want pictures, I will try and dig some out.
Thumpers Rule !

Offline Tossa

  • Legend
  • *****
  • Posts: 2087
    • View Profile
Re: Wanted Lights/Tail light 79 WR250
« Reply #4 on: December 03, 2014, 10:21:20 am »
What rear mudguard have you got ?
At present I use the original motocross one. My 78 390WR has a TY replica light and rubber plate holder, the 390 Auto has a Bresica rubber flap with original 79 WR large round tail light. Good luck with finding a 79/80 headlight ! Fairly rare. Make sure if you do buy one it has the headlamp bulb holder. The Auteroche holders were unique to Husky. A TY lamp works well or a Preston Petty unit.

If you want pictures, I will try and dig some out.

Thanks Grouty good info
1973 Rickman Zundapp Metisse, to rebuild
1979 Husqvarna WR250
1974 Husqvarna MAG CR250

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: Wanted Lights/Tail light 79 WR250
« Reply #5 on: December 03, 2014, 03:30:06 pm »
DC make later model headlight shrouds that are useable, phil at husky parts has glass units, Honda shops carry the bulbs for those 83+ shrouds, biiig bulbs. I just wacked a mx guard thingy on the back and stuck a ty light on the top of it.

café husky tech tips have wiring diagrams

also try HVA factory website

all sorts of stuff

Offline Tossa

  • Legend
  • *****
  • Posts: 2087
    • View Profile
Re: Wanted Lights/Tail light 79 WR250
« Reply #6 on: December 03, 2014, 03:38:13 pm »
Thanks fellas some great leads and food for thought
1973 Rickman Zundapp Metisse, to rebuild
1979 Husqvarna WR250
1974 Husqvarna MAG CR250