can anyone ID these pegs

[ty4]

i'm thinking YZ 125 C/X ??





CHEERS
TONY

[DJRacing]

They are not C .  "C" doesn't have the angled brace underneath, well at least they don't on any of my "C's". I have changed the pegs on my X and I can't remember for sure but I do think they are X pegs.
I'm sure someone will correct me if I'm wrong.

[ty4]

thanks for the info

[OverTheHill]

SC500/mx250/360, not sure if link will work but was from an SC500 footrest on ebay. Plus i remember what mine looked like on my MX250 from the same year--due to the fact that i had a bloody stupid idea that the footrests were too far back and extended them forward then promptly wished i hadn't. Jeez i had some stupid theories back then--nothing's changed there then!!.

http://i.ebayimg.com/12/!B-+rEn!B2k~$(KGrHqUOKisEz(CCWkrDBM-TztS!r!~~_1.JPG

[Nathan S]

Can't see the pic. Apparently it has been moved.

MX/SC and early TT have a 10 or 12mm pin in single shear. There's a difference between MX/SC and TT, but I can't remember what it is...

YZ125C/X have an 8mm bolt in double shear.

[ty4]

dont know what happened there i'll see if i can find them ...again

[Nathan S]

....and fixed.

Definitely not YZ-C or YZ-X (which are different to each other, FWIW).

Definitely MX/SC or TT, but I couldn't tell you which. Whatever the difference was, it was minor - 99.99% sure that those pegs will fit either type of bike.

[ty4]

thank you kind sir

[Davey Crocket]

Look like YZ250/360 A/B type, and MX250/400B.

[ty4]

oooohh if they fit YZ A'S .....................there worth a fortune