Your Suzuki Projects

[suzuki43]

With it being winter here  (NZ) and no racing,its time for projects etc.
I'm rebuilding me RM125E which has a lunched engine, plus hoping to start work on my RM250D.I am a Pre 85 tragic.
What are you lads working on?.

[brad747]

hey, Im working on my tm125k and an rm125T...
Cant wait to get the tm done and take her out for a burl!!!!

[crs-and-rms]

im working on rm 125 c colecting parts
rm 125 n and t colecting parts have most
rm 125 z and d colecting parts and deciding if i will do both or just one
rm 250 a,b,c2 and t have most parts for the a and b ,need motor for the t anyone got one thay dont need
pe 250 n and t have most parts for both and have started

[Quicksilver]

God.. Dont know if want to think about..

RM250B. Needs a tank, pipe.
RM370 fitted with XT500 engine.
RM125B. Needs too much. Might quit it
RM125C. Needs too much also. Might quit it too.
PE250T.  Need a pipe if I can find one. Pair of sideplates.
TC120. 1969 or 70.

You only wanted the zooks right! 

[brent j]

TM 125L and TM185

Brent

[cyclegod]

TM185

Brent

TM-S 185 seems we will have similar beasts Brent  , although I intend to fit a speedo/preston petty headlight/taillight for vinduro duties and since it will be pre-compliance (Dec 74) I might try to get it road rego in W.A too 

[brent j]

SNAP!

Doing much the same CG. Vinduro bike with lights and maybe a pre 75 VMX 250 ride as well.
I remember just how versitile mine was back in 75-76.
I'm starting out with a TC185 motor but I may have found a tidy but siezed TS185L here in town. Needless to say I'm working on that one!

Cheers

Brent

[YUMASTEPSIDE]

Only a couple of 'zooks at the moment.......TC120
                                                          PE175
                                                          PE250 with'77 tank
                                                          DR400 in PE400 running gear,IT tank and lights

[Doc]

Bolting Dodgee's TM250 motor back in after welding the big end together at Coff's in April  she should be  together by tonight sometime 

Waiting to get my crank back for the 125A/B/C then it can be bolted together and finished off.

Pulled the motor out of the '71 TS125 for some cluster swapping and a big end rebuild.

Refitted a '77 TS125 in it's place last weekend. Bolted on a fresh RM125S top end and she's ready to ride whilst I sort the original engine to keep it back in pre'75 where it belongs 

Awaiting a TM125 frame into which I plan on fitting an RM400. 'If' it's a definate no go I'll get the '77 TS125 ratios sorted and refit that instead

I have a TS/TM250 project to build after this and an RL to have rebored as well as a couple of RM400 wheels needing shiney new spokes so as I can relace them..

By this time I should have some more parts for the little SL100. It's going to have a bit of an engine freshen up, cam chain/tens/guide/cam sprockets/piston/rings/valves/guides/springs bla bla bla etc etc...nothing over the top though

After this I'd really like to go to town on the old '69 TS250. mudcatchers, downpipe, TM top end and carb, fabricate an airbox and nice seat and fit a pair of trials universals 

there is more but this lot should see me through winter 

[RM Ted]

RM 125 C NUMBER 3,JUST WAITING ON A FEW BITS FROM THE US.

[dodgee]

RM 250 a  needs exhaust and seat base
TM 125   needs rebore
RM 125 S  waiting to be turned back to being a M
RH 250 needing a few parts but progressing well
TM 250 nealy finished thanks to doc
TS 90 might be on the cards if i can find one
that is all for this month

[suzuki43]

Lovely stuff men,keep them coming.

[basil44]

Hey Quicksilver,your RM125B or C might be interested if you want to sell so I can finish my 125A motor,come nightmare.My bikes on the go are RM125A,TY350N,YZ80C,YZ250B come OW12 replica.  

[caps 999]

heres mine 73 tm250 (this it the before)

[Noel]

I've added a yellow bike to my red stable,
RM125T,
going concern ,sorting out for  race bike , not bling  resto,
swing arm bushes , fork service, minor tidy up, new cables etc


Noel