Author Topic: CMX/CDT Rider Back Numbers  (Read 9209 times)

0 Members and 1 Guest are viewing this topic.

Offline gt96

  • C-Grade
  • **
  • Posts: 140
    • View Profile
CMX/CDT Rider Back Numbers
« on: February 04, 2014, 06:13:08 pm »
Given the controversy over 2014 MA requirements for rear chain guards for CMX/CDT for 2014  (http://forum.ozvmx.com/index.php?topic=32985.0), noticed that the rider back numbers appear to be applicable now.

2013 general rule was:
12.6.5
Back Numbers – Seniors and Juniors
12.6.5.1
No junior or senior may compete without back numbers, except in Enduro, Moto-
Trials, Road Racing or interclub/closed to club competitions
unless wearing the machine identification number on their back
in contrasting colours and with a minimum size of 125mm height and 20mm width of
stroke

2014 CMX/CDT now has:
16.9.2 Back Numbers
16.9.2.1    No competitor may compete in any competition unless wearing the machine identification number on their back in contrasting colours and with a minimum size of 125mm height and 20mm width of stroke.

Is this likely to be enforced in club competition?

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #1 on: February 04, 2014, 07:02:23 pm »
i have been wearing mine for 4 years now just put it on also helps with the dirt rosted from the bike in front of you when the track is wet.
look at the evo race pics of tbc all the penrith ones mine is a st george one were it at all club days.
cost 70.00 vinyl and printed.

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #2 on: February 05, 2014, 10:00:55 am »
The requirement for a back number was always there.  It was just in "all disciplines".
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #3 on: February 05, 2014, 10:19:41 am »
OK, here we go again. I've been racing on and off for over 40 years and have managed to make it without a number on my back. I know why they're now insisting on it but in this era of transponders it seems to me to be a bit superfluous and a few decades too late :-\.  My whingeing isn't going to change things however, so where can I get numbers put on my jerseys (screen printed, iron on??) It's more the inconvenience of having to get it done that bothers me more than the actual number itself.
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline vandy010

  • Legend
  • *****
  • Posts: 1982
  • #789 MX125a BMCC Brisbane
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #4 on: February 05, 2014, 10:24:16 am »
All i do is print the numbers out on a sheet of paper and laminate it
I then zip tie it to my body armour...
As for putting it on a jersey...
Well i reckon you might need a plan "B"...
"flat bickie"

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #5 on: February 05, 2014, 10:31:03 am »
Quote
All i do is print the numbers out on a sheet of paper and laminate it I then zip tie it to my body armour...
As for putting it on a jersey...
Well i reckon you might need a plan "B"...
I don't wear external body armour Vandy, I wear an Axo Air Cage under my jersey. Anyone got a good plan B ?
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline Tossa

  • Legend
  • *****
  • Posts: 2087
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #6 on: February 05, 2014, 11:14:46 am »
An old school bib,  The ones we used at the Nats cost $12.00 each and the wife did the artwork.  We only had 20 made  all with different numbers on
1973 Rickman Zundapp Metisse, to rebuild
1979 Husqvarna WR250
1974 Husqvarna MAG CR250

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #7 on: February 05, 2014, 11:30:48 am »
Or slide down to the  AFL or NRL shop and buy a couple of numbers and iron them on yourself..about $5 each last time I bought some..

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #8 on: February 05, 2014, 12:08:23 pm »
Whats AFL?...... ;D
QVMX.....Australia's #1 VMX club......leading the way.

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #9 on: February 05, 2014, 12:46:26 pm »
That is the same as Gay FL
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline Mick D

  • Legend
  • *****
  • Posts: 2915
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #10 on: February 05, 2014, 12:50:31 pm »
Or slide down to the  AFL or NRL shop and buy a couple of numbers and iron them on yourself..about $5 each last time I bought some..

An old school bib,  The ones we used at the Nats cost $12.00 each and the wife did the artwork.  We only had 20 made  all with different numbers on

Brilliant solutions, thanks to both of you ;)
"light weight, and it works great"  :)

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #11 on: February 05, 2014, 01:28:00 pm »
With big respect for Barry's Bibs which were an outstanding way of spotting the West Aussies at the Nats, I prefer Brian's iron on solution. I've worn bibs in the past and found them hot and slightly uncomfortable to wear, blocking out the air flow. Even though I'll be riding only dirt track I need as much air on my fat gut as possible ::).......plus I've got some cool period jerseys I'd hate to hide with a bib. Now I just have to find a footy or sports outfitter shop.
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline Mick D

  • Legend
  • *****
  • Posts: 2915
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #12 on: February 05, 2014, 01:41:04 pm »
True, true, but I think the rule says the number on the rider has to match the number on the bike.

If so with this plan "C" it would be easy to loan you buddy a race ride, particularly if you are dramatically different in physical stature(size).

Just wondering out loud, which reminds me,,,,,,,,,,,change thread.
"light weight, and it works great"  :)

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #13 on: February 06, 2014, 12:46:04 pm »
Most CofCs and lap scorers accept that if you are changing bikes you may not be able to change back numbers.  Just ask them when you request a change of machine.  Most officials will work with a rider when they are treated with respect.
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: CMX/CDT Rider Back Numbers
« Reply #14 on: February 06, 2014, 07:03:45 pm »
just read 2014 moms you have to have back nos in all compertition including cdt cmx up to 1978 and now post classic dt/mx