Author Topic: Chain support ( guard )  (Read 48755 times)

0 Members and 3 Guests are viewing this topic.

Offline FourstrokeForever

  • Legend
  • *****
  • Posts: 1702
  • AKA Mark H #35 VCM
    • View Profile
Re: Chain support ( guard )
« Reply #165 on: February 06, 2014, 09:08:10 am »
Good onya Kevin, KTM47. What a guy....outlining any problem with the MOMS and forcing us guys with pre 75 and older machinery to mount something that was never on our bikes in the first place. All because one stupid moron hurt himself while helping to pick up a bike! I say, STOP WORKING FOR INSURANCE COMPANIES and start lifting our sport back to where it once was in the 80's. You lot are all the same once you get a sniff of power.
Arrogance.....A way of life for the those that having nothing further to learn.

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: Chain support ( guard )
« Reply #166 on: February 06, 2014, 09:49:05 am »
Thank you for your kind words TBM.  All I have done is let MA know there is a problem.  Sooner or later they would have found it.  I could have just kept quite about letting them know but that is not my way.  Also NSW were going to enforce it anyway.  People want rules clarified well that is what they have got.
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline KTM47

  • Legend
  • *****
  • Posts: 1412
    • View Profile
Re: Chain support ( guard )
« Reply #167 on: February 06, 2014, 12:36:06 pm »
 16.15.4.6 Other than CMX/CDT A chain guard made of suitable material must be fitted in a way to prevent trapping between the lower drive chain run and the final drive sprocket at the rear wheel.

There you go Ted your original question has been answered.

http://moms.org.au/rules/18-classic-motocross-dirt-track/18-4-machine-and-class-identification-classic-mx-dirt-track/
« Last Edit: February 06, 2014, 12:40:53 pm by KTM47 »
MAICOS RULE DESPITE THE FOOLS

1999 KTM 200, 1976/77 KTM 400,1981 Maico 490

Offline smed

  • Legend
  • *****
  • Posts: 1646
    • View Profile
Re: Chain support ( guard )
« Reply #168 on: February 06, 2014, 01:25:17 pm »
16.15.4.6 Other than CMX/CDT A chain guard made of suitable material

And the suitable material is? :)

TM BILL

  • Guest
Re: Chain support ( guard )
« Reply #169 on: February 06, 2014, 01:33:52 pm »
16.15.4.6 Other than CMX/CDT A chain guard made of suitable material

And the suitable material is? :)

Under the guidelines of the MA mission statement that would be

UNOBTAINIUM  ;D

Offline Tossa

  • Legend
  • *****
  • Posts: 2087
    • View Profile
Re: Chain support ( guard )
« Reply #170 on: February 06, 2014, 02:37:16 pm »
16.15.4.6 Other than CMX/CDT A chain guard made of suitable material must be fitted in a way to prevent trapping between the lower drive chain run and the final drive sprocket at the rear wheel.

There you go Ted your original question has been answered.

http://moms.org.au/rules/18-classic-motocross-dirt-track/18-4-machine-and-class-identification-classic-mx-dirt-track/

So is a change going to be made to Motocross and Supercross regs:


15.22.8 Drive chain protection
 
 
15.22.8.1 Front sprocket may be guarded so as to prevent direct access to the chain or sprockets with the fingers.

No mention anywhere about chain gaurds
1973 Rickman Zundapp Metisse, to rebuild
1979 Husqvarna WR250
1974 Husqvarna MAG CR250

Offline bazza

  • Legend
  • *****
  • Posts: 2352
    • View Profile
Re: Chain support ( guard )
« Reply #171 on: February 06, 2014, 02:42:50 pm »
Still  ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Once you go black  you will never go back - allblacks
Maico - B44 -1976 CR250- 66 Mustang YZF450,RM250
Embrace patina

Offline Ted

  • Legend
  • *****
  • Posts: 2800
    • View Profile
Re: Chain support ( guard )
« Reply #172 on: February 06, 2014, 04:11:08 pm »
16.15.4.6 Other than CMX/CDT A chain guard made of suitable material must be fitted in a way to prevent trapping between the lower drive chain run and the final drive sprocket at the rear wheel.

There you go Ted your original question has been answered.

http://moms.org.au/rules/18-classic-motocross-dirt-track/18-4-machine-and-class-identification-classic-mx-dirt-track/

Thanks Kev, you the man ;)
81 YZ 465 H   77 RM 125 B

HeavenVMX

  • Guest
Re: Chain support ( guard )
« Reply #173 on: February 06, 2014, 06:49:55 pm »
I have looked all over the MOMS WEB page to download it but can not see how. Can anyone help

Offline FourstrokeForever

  • Legend
  • *****
  • Posts: 1702
  • AKA Mark H #35 VCM
    • View Profile
Re: Chain support ( guard )
« Reply #174 on: February 06, 2014, 07:23:28 pm »
Thank you for your kind words TBM.  All I have done is let MA know there is a problem.  Sooner or later they would have found it.  I could have just kept quite about letting them know but that is not my way.  Also NSW were going to enforce it anyway.  People want rules clarified well that is what they have got.
I could of kept quiet as well, but it's not in my nature either. It's a ridiculous rule that came from the brain of someone who has nothing better to do with their time than to amend rules that have been working for decades, and you supported it. So I just told it as I see it. It's not going to prevent bugger all incidents in the greater scheme of things and now the license paying, fee paying, entertainment providing riders have to modify their bike(s). We're not professionals, we don't have sponsors, most of us work on our own bikes make sure we stay within the set rules and pay through the nose to attend MA sanctioned meetings.
How about giving SOMETHING back to the sport other than a poxy little museum in a box sized room that no one gets to see! Us clubbies, the bread and butter of the sport, get screwed from every which way while the real pros who get paid to ride get support from MA. I'm jack of it.
Arrogance.....A way of life for the those that having nothing further to learn.

Offline Ted

  • Legend
  • *****
  • Posts: 2800
    • View Profile
Re: Chain support ( guard )
« Reply #175 on: February 06, 2014, 08:24:36 pm »
I have looked all over the MOMS WEB page to download it but can not see how. Can anyone help

16.15.4.6
81 YZ 465 H   77 RM 125 B

HeavenVMX

  • Guest
Re: Chain support ( guard )
« Reply #176 on: February 06, 2014, 09:45:33 pm »
Yes Ted I can look at it and read it ::)

I want to download it and be able to print it so I can take it to a meeting. Surprising as it may seem many most racers don't read these posts

Offline VMX247

  • Megastar
  • *******
  • Posts: 8766
  • Western Australia
    • View Profile
Re: Chain support ( guard )
« Reply #177 on: February 06, 2014, 09:53:35 pm »
Yes Ted I can look at it and read it ::)

I want to download it and be able to print it so I can take it to a meeting. Surprising as it may seem many most racers don't read these posts

try this PDF... maybe the above links for trackside only

http://www.ma.org.au/index.php?id=142

13 pages lucky for some  ;)
Best is in the West !!

Offline Ted

  • Legend
  • *****
  • Posts: 2800
    • View Profile
Re: Chain support ( guard )
« Reply #178 on: February 06, 2014, 09:56:57 pm »
Yes Ted I can look at it and read it ::)

I want to download it and be able to print it so I can take it to a meeting. Surprising as it may seem many most racers don't read these posts

Well that surprises me. I thought YOUR word was gospel
81 YZ 465 H   77 RM 125 B

Offline NSR

  • Legend
  • *****
  • Posts: 930
  • Sunshine Coast
    • View Profile
Re: Chain support ( guard )
« Reply #179 on: February 06, 2014, 10:02:13 pm »
Does any of this pass?  Lucky it came off on the last lap :o.  I have never run a front sprocket cover and not about to start.  Stupid rule!  I'm an MA official just not a very good one ::)

 
The Swvm though the tree's! http://youtu.be/4h6BbasT16I
Metalink Conondale vinduro sprint. May 19/20 2018    
www.metalink.net.au  Bike trailers & Canopies