Author Topic: ts/tc/a 100 suzuki inner disc valve plate wanted  (Read 1643 times)

0 Members and 1 Guest are viewing this topic.

Offline ELC hunter

  • B-Grade
  • ***
  • Posts: 270
    • View Profile
ts/tc/a 100 suzuki inner disc valve plate wanted
« on: January 14, 2014, 04:39:00 pm »
I asked before after a Suzuki inner disc valve plate for ts/tc 100 or 90 or A100 ,and was given one thanks T .After one which has a complete gasket surface on it where the disc valve runs on it please. Yes I can buy new but would be worth more than its worth, last resort I will but a good s/h part will do .ELC.

TM BILL

  • Guest
Re: ts/tc/a 100 suzuki inner disc valve plate wanted
« Reply #1 on: January 14, 2014, 04:58:00 pm »
Is it the cover come manifold you need ?

I have a NOS one I think is for a TS 100 Suzuki PN 11440-25700

Bill

Offline ELC hunter

  • B-Grade
  • ***
  • Posts: 270
    • View Profile
Re: ts/tc/a 100 suzuki inner disc valve plate wanted
« Reply #2 on: January 15, 2014, 11:24:02 am »
Bill no its the back part of what you have described ,its screwed directly to the right side crankcase and the disc valve runs between them. And your part is the outer cover -inlet manifold .Thanks.ELC

TM BILL

  • Guest
Re: ts/tc/a 100 suzuki inner disc valve plate wanted
« Reply #3 on: January 15, 2014, 01:54:49 pm »
No worries will have a look , might have a SH one

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: ts/tc/a 100 suzuki inner disc valve plate wanted
« Reply #4 on: January 15, 2014, 06:37:15 pm »
All mine are either gone or "goners" sorry mate. Tim754
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

Offline BETRIC

  • A-Grade
  • ****
  • Posts: 312
    • View Profile
Re: ts/tc/a 100 suzuki inner disc valve plate wanted
« Reply #5 on: January 16, 2014, 05:13:45 am »
I just bought nos inner disc for my 73 TC100 from Paul Miller M/C $59 USD plus postage don't forget the gasket that go's between the disc and crankcase, I would give Ray at SUZI PARTS in South Aust a call.
DELTEK, 72 MINI TRAIL, 73/4 XR75, 77/78 XR75, DG MONOSHOCK FRAME XR75, REDLINE FRAME XR75, PK RACING MONOSHOCK FRAME XR75, JWRP XR FRAME, SL70K1, 81 CR80RB, TY80A/B, YZ80A/B/D, GT50/80A, GTMX80A, 73 GTMX, GT1, COOPER MX, COOPER ENDURO,MX360A,MX250B,YZ125X MX100, 72 XL250, TC100,TL125, TY250C,IT250J

Offline roy dale

  • B-Grade
  • ***
  • Posts: 150
    • View Profile
Re: ts/tc/a 100 suzuki inner disc valve plate wanted
« Reply #6 on: January 17, 2014, 12:36:52 pm »
I have you part $20.00 go to www.japbikespare.com.au