Author Topic: Suction hose on yz465  (Read 1315 times)

0 Members and 1 Guest are viewing this topic.

Offline reece

  • Novice
  • *
  • Posts: 42
    • View Profile
Suction hose on yz465
« on: October 01, 2013, 08:17:22 pm »
I was wondering where and what the suction hose behind kick starter on crankcase does and where it goes as I can only find part on list I have waiting for cd with manual to turn up.

Offline Maicoman

  • A-Grade
  • ****
  • Posts: 332
    • View Profile
Re: Suction hose on yz465
« Reply #1 on: October 01, 2013, 08:33:46 pm »
This should be just a gearbox breather. Basically a hose to nowhere. Some IT 465's have 2 breathers. I have one on the RH crankcase and one on the clutch actuating arm. Standard affair but some Yammies have extra little things like that between cross over models.
Let's face it some dirt bikes were never meant to be ridden.

Offline VMX Andrew

  • Legend
  • *****
  • Posts: 961
    • View Profile
Re: Suction hose on yz465
« Reply #2 on: October 02, 2013, 03:16:35 pm »
Is it normal for the oil to leak out of the breather hose while bike is running ??

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: Suction hose on yz465
« Reply #3 on: October 02, 2013, 03:35:14 pm »
This should be just a gearbox breather. Basically a hose to nowhere. Some IT 465's have 2 breathers. I have one on the RH crankcase and one on the clutch actuating arm. Standard affair but some Yammies have extra little things like that between cross over models.

Wierd ... My 465H has the RHS one from the crankcase only and the 250H has the one on the clutch actuator only  :o
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.