Author Topic: Husky piston for 74 125, 1972 CR 400 base gasket.  (Read 2216 times)

0 Members and 1 Guest are viewing this topic.

Offline Barronvmx

  • C-Grade
  • **
  • Posts: 114
    • View Profile
Husky piston for 74 125, 1972 CR 400 base gasket.
« on: April 24, 2013, 09:47:25 pm »
Does anyone have a 1974 125 piston kit 1st over size. it is 55.19mm Dia. The piston is different to the previous years as my engine has the longer conrod.
Need 1972 400 base gasket they are the same for all 400s up to 1974.
regards.
Glenn
Huskies
CR250 1972, CR400 1972, SC125 1973, CR250 1975GP, WR250 1979/80, XC125 1983, TX510 1983, XC125 1984 project, CR250 1984 project
Honda's
SL100 1971, XL100 1974, Hondasaki 210, XL185 1981 project
Jawa's
1959 250 project, 1969 175 trail boss project.
Sachs 1969 125

Offline 2T_vs_4T

  • Novice
  • *
  • Posts: 41
    • View Profile
Re: Husky piston for 74 125, 1972 CR 400 base gasket.
« Reply #1 on: April 24, 2013, 11:23:49 pm »
Hi,
Can you post a photo of the piston you have and some dimensions.
Cheers 2T_vs_4T.
1978*AUS*SWM*RS125GS*C*0003*
1978*AUS*SWM*RS175GS*D*0002*
1982 Husqvarna 125 WR
2002 YZ 250P WR.

Offline Huskydoggg

  • Novice
  • *
  • Posts: 13
    • View Profile
Re: Husky piston for 74 125, 1972 CR 400 base gasket.
« Reply #2 on: April 25, 2013, 01:24:34 am »
Glenn,
If you can't find 1st over, I have a new 56.5 mm Wiseco kit available.
Steve
Huskydoggg.com

Offline Barronvmx

  • C-Grade
  • **
  • Posts: 114
    • View Profile
Re: Husky piston for 74 125, 1972 CR 400 base gasket.
« Reply #3 on: June 05, 2013, 12:32:08 pm »
Thanks anyway but found a Piston locally from Gary Mc and made my own gasket. I would be very careful using the wiseco for pre 75 huskies, they apparently fail and kill engines.
Huskies
CR250 1972, CR400 1972, SC125 1973, CR250 1975GP, WR250 1979/80, XC125 1983, TX510 1983, XC125 1984 project, CR250 1984 project
Honda's
SL100 1971, XL100 1974, Hondasaki 210, XL185 1981 project
Jawa's
1959 250 project, 1969 175 trail boss project.
Sachs 1969 125