Fitting CDI ign to DT125E

[John Orchard]

Hey Guy's,  I was wondering if anyone knew whether I could fit the electronic ignition from a later DT175 to a DT125E.  eg: crankshaft & stator mounting the same?  Thanks.

[Lozza]

Put a YZ80/100 J ignition on and don't bother with DT shitter stuff

[GMC]

How much later 175?
This is a list of left hand crank's and crankcase's
If your ignition came from one of these crankcases then you shouldn't have any problem

Part # = 2A6-15111-02-00
Part Description = CRANKCASE (LH)
Model Count = 8
DT125E 1978 125 DT125 Dual Purpose
DT125F 1979 125 DT125 Dual Purpose
DT125G 1980 125 DT125 Dual Purpose
DT125H 1981 125 DT125 Dual Purpose
DT175E 1978 175 DT175 Dual Purpose
DT175F 1979 175 DT175 Dual Purpose
DT175G 1980 175 DT175 Dual Purpose
DT175H 1981 175 DT175 Dual Purpose



Part # = 1W1-11412-01-00
Part Description = CRANK (LH)
Model Count = 32
DT125E 1978 125 DT125 Dual Purpose
DT125F 1979 125 DT125 Dual Purpose
DT125G 1980 125 DT125 Dual Purpose
DT125H 1981 125 DT125 Dual Purpose
DT175C 1976 175 DT175 Dual Purpose
DT175E 1978 175 DT175 Dual Purpose
DT175F 1979 175 DT175 Dual Purpose
DT175G 1980 175 DT175 Dual Purpose
DT175H 1981 175 DT175 Dual Purpose
IT125G 1980 125 IT125 Dual-Purpose
IT125H 1981 125 IT125 Dual-Purpose
IT175D 1977 175 IT175 Dual-Purpose
IT175E 1978 175 IT175 Dual-Purpose
IT175F 1979 175 IT175 Dual-Purpose
MX125C 1976 125 MX125 Off-Road
MX175F 1979 175 MX175 Off-Road
MX175G 1980 175 MX175 Off-Road
MX175H 1981 175 MX175 Off-Road
TZ125G 1980 125 TZ125 Road Racer
YT125G 1980 125 YT125 ATV
YT125H 1981 125 YT125 ATV
YT125J 1982 125 YT125 ATV
YT125K 1983 125 YT125 ATV
YT125L 1984 125 YT125 ATV
YT125N 1985 125 YT125 ATV
YZ100C 1976 100 YZ100 Competition Motocross
YZ100D 1977 100 YZ100 Competition Motocross
YZ100E 1978 100 YZ100 Competition Motocross
YZ125C 1976 125 YZ125 Competition Motocross
YZ125D 1977 125 YZ125 Competition Motocross
YZ125E 1978 125 YZ125 Competition Motocross
YZ125X 1976 125 YZ125X Competition Motocross

[John Orchard]

Wow thanks Geoff, you are the part number cross-reference guru  ;-)

Loz will the YZ rotor fit the crank?  Would I just take a guess at the positioning on the crank then fine tune with a timing light?

Thanks guys