Watercooled RM125C

[TM BILL]

http://www.ebay.co.uk/itm/suzuki-rm-125-twinshock-evo-rm125-project-/261024009075?pt=UK_Motorcycles&hash=item3cc63e4b73#ht_500wt_1361

I didnt know Stillmotor made a water cooling system  you learn somthing every day 

Whats the swinging arm off ? or is it aftermarket ?

Wheels are mid 80s RM i think 

[Simo63]

Swingarm look like standard 1979/80 RM125N/T to me.

[TM BILL]

I think the Sw arm is steel  maybe TS 250 ER ?

Looks siillar to N or T arm but im sure its steel 

[Simo63]

I think the Sw arm is steel  maybe TS 250 ER ?

Looks siillar to N or T arm but im sure its steel 

At first glance it looked like an alloy RM or PE one but I hadn't considered steel to be honest 

Not so sure now?

[asasin]

I rembember one of these cyclic heads on a rm125a road race bike circa 1978, very cool in the day .

[TT5 Matt]

yeah the swinger is steel,check holes at the l/hand side near the axle for the chain guard and also the welds dont look right

[JohnnyO]

The head looks the same as Shinobi, maybe they made it for Stillmotor to market.

[oldfart]

Swingarm could be off a DR 400

[SLAWESY]

Swingarm could be off a DR 400

No, No.... not another swingarm thread!!!   

[DR500]

Swing arm looks like a DR500

[suzuki27]

I reckon hubs and backing plates are 84/85ish RM and steel suzy swingarm. Interesting bike,be good to look at in the flesh.

[BAHNZY]

Front forks & wheels - 84 RM125
Rear wheel - 84 RM125
Cylinder isn't from a C model (carb mount isn't correct)
I think the engine maybe a N or T given the kick starter fixing
Can't work out the carb, certainly not from a RM C model
RM N 125 tank
Steel swing arm
Can't work out the expansion chamber. The connection to the muffler is weird.
Not convinced the head is from a Suzuki. Looks a lot like a Yamaha version ive seen before.
What's the go with the frame mods at the swingarm pivot on the left side.
The engine & frame numbers make no sence

[smed]

In the specs the model year says 1980,so is it a T then with older model short sidepanels

[JohnnyO]

That thing has been butchered.. at a closer look you can see it's a N/T model with a B/C rear subframe roughly welded on and it has '84 forks & front wheel 

[Simo63]

That thing has been butchered.. at a closer look you can see it's a N/T model with a B/C rear subframe roughly welded on and it has '84 forks & front wheel 

It's been turdinated