Can Am/SWM 6 speed box needed

[Drakie]

Hi all,
Riding my SWM at the Kenda Rally I realised that the 5 speed (long story short - it's Laurie Smith's bike from the 1979 ISDT with a 'factory fitted' T'n'T motor) just doesn't work with the GP rotary disc cut I inflicted on it. Does anyone have a complete 6 speed box for sale? How about a stock T'n'T rotary valve?

[GMC]

Don't you need a frame as well

[Drakie]

Ah, that'd be the other sh--box.
Who can't keep a secret?!

[Canam370]

Don't you need a frame as well

Don't worry Geoff, Drakies made a point of you being the ONLY one to re-fabricate his frame AND make a centrestand for him. He said that no-one else will get the work 'cause you're a mate,so you will have all his work. Made a point of saying that several times actually........

[VMX60]

Peter

We need a OSSA SDR/Phantom motor for the Blue Alron maybe a swap for my SWM black complete core motor would have to check its a 6 speed model

Also have a few TNT motors but i think there all 5speed

Let me know if you are interested in a deal

Murray

[supermotomc]

what frame do you want ?why did you cut the disc was it a swm and where are you timing it too.. the std tnt was a dog properly timed the swm should take 5 or six woulnt make any difference

[NSR]

why did you cut the disc was it a swm

No it's a 5sp tnt motor in a SWM frame.  I thought it hauled, maybe a bit to much?

I have some SWM discs But I'm not sure what they fit.

Cheers
Noel

 

[GMC]

why did you cut the disc was it a swm

No it's a 5sp tnt motor in a SWM frame.  I thought it hauled, maybe a bit to much?

I thought it hauled too, I wouldn't say too much but it would be brilliant with a touch more bottom end.

[supermotomc]

well suggest you add 40mm to the centre section of the straight portion of the chamber.. what degree wheels do you have? and which fly wheel do you have on

[Drakie]

Sorry about the delay guys, I've been incomunicado at Blackwood.
Murray, I might have a spare Super Pioneer motor which Alron used in their bikes, the head cutaway for the fins takes a stock SP pipe which Ron Lyon used too. I'm dead keen to get your SWM motor but am I fiddling a bit too much with the history of the bike? The factory did install the T'n'T motor but the original was a genuine SWM. Decisions, decisions....
Now, I admit to being a bit keen with the tinsnips but the devil in me (and the memory of Norm Watts' bike and Gunny's bike) made me go the GP cutout PK used in Gary Jones' bike which hauled.
I'm yet to check out the flywheel weights but want to leave the pipe stock for the appearance.
Thanks for all the helpfull suggestions guys, I know I'll get it right soon.
I had a ball at the Kenda Rally on it. After the all the dumb incomprehension of 'What is it?' I had it sound tested by the DSE at 93.8db @ 5000 rpm, under the latest FIM/MA/DSE 94 level. Cool. Revised suspension worked a treat and while I took a hammering from the rough, rocky and rutted course (fast too) only my hands were sore from clutch and front brake pull. Surprised a lot of riders on the downhills and caught all the guys who blasted past me on the roads in the tighter stuff; sweet. 158 ks and I only lost 2 bolts, one made the front KTM guard wave madly but it didn't break.

[rustedstud]

Yeah Drakie, you past me like I was looking for parking, I thought your throttle was stuck!

[odd1]

Ive just suggested to him to put the internals of a cuckoo
clock in then he will really fly

[GMC]

Ive just suggested to him to put the internals of a cuckoo
clock in then he will really fly

I don't think it would be that wise for the motor internals to be from the same components as the riders brain.

[Canam370]

Ive just suggested to him to put the internals of a cuckoo
clock in then he will really fly

I don't think it would be that wise for the motor internals to be from the same components as the riders brain.

  Ouch!

[Canam370]

I am being forced to type this by Drakie who's dictating this diatribe whilst he holds a gun to my head.........

Morris! Why don't you get off the computer and do some useful work instead of bitching and moaning about your favourite customer!
.....and as for you Baker, the bottomless swamp at Harrow beckons.