Same part, but WOW what a difference....

[cyclegod]

The highest
http://cgi.ebay.com/ebaymotors/Suzuki-RM100-TC125-TM100-TM125-TS125-Kick-Starter-NOS_W0QQcmdZViewItemQQcategoryZ35595QQihZ016QQitemZ260194743696QQrdZ1QQsspagenameZWDVW

The middle
http://cgi.ebay.com/ebaymotors/Suzuki-TM125-RM125-nos-kickstart-assy-1973-1975_W0QQcmdZViewItemQQcategoryZ35581QQihZ009QQitemZ190188222661QQrdZ1QQsspagenameZWDVW

The lowest... ( I have a few of these from this guy )
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=023&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=360033252419&rd=1

You can buy two of the cheap ones and still have change compared to the expensive one 

[cyclegod]

And the winner is TMBILL

nice buy on the cheap one bill 

[zorroz]

That happens a fair bit on eviabay. I found a nos sproket cover for my TM125 and paid $20.00 and seen them listed and sold for over $120.00!!

[Freakshow]

ITs always who is looking that week, what they will pay, and how the listing is often listed. same thing happens all the time with unclear or partial title lines, or you get a YZ listing on a DT1 part and it sells for 4 times the price yet same code ? WTF
Knowledge is everything :O)

[Doc]

I scored this one..knuckle is included though not shown but it needs a new pivot bolt. (which I already have) grabbed this one for a spare 

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=024&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=370033821582&rd=1

this one I grabbed last month

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=360015990002

an I scored this lot recently and for once, I actually have a use for all of them 

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=170201525983&rd=1
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=170201526117&rd=1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=200206706530&ssPageName=STRK:MEWN:IT&ih=010

[TM BILL]

Thanks CG i really ought to be paying you a finders fee  are you going to CD5 ? maybe i can buy you a few cold ones
I dont know how you do it but im glad you do , thanks again Bill.

[cyclegod]

Not going to CD5, its just toooooooooo far from W.A, if it ever goes to S.A I might think about it but for now all my spare cash is going into the three TM's and the MX250A projects.

[VMX247]

Cyclegod are we going to see your projects on the WA tracks this year??

[cyclegod]

If people like Pro-flo have anything to do with it PROBABLY NOT 

My MX250 just needs the Circle-F kit pipe welded up, fuel line and filter (easy), and that damned pvl ignition to get going and then there's running it in and carb tuning to do. The TM's aren't getting started until the MX is raceable, I do have a lot of new parts for them including the hard to get stuff (mag covers) so they should'nt be as much of a bastard as the MX has been.

Swap meet at Cannington on sunday may generate a little extra money as I have some goodies to sell (TM250/400 rear wheel, J&R DT250A pipe and muffler and other DT250 parts)

[TT5 Matt]

hi C/God
i to should thank you for the lead on the $55 with post[no one bid that night]!
with these circle-f kit pipes are they a kit of made up cones/pipe for a compentant welder to finish? and do they do one for an rms125?

TT5 Matt

[cyclegod]

Some circle-f pipes need welding on of the tail pipe only (my MX pipe is for the 360 as well as the 250 so some adjustment is needed)

Retro rocket (vintage iron) do a pipe for the RM125S

[TT5 Matt]

hi all
got my $55usd kick start lever today but its got h/duty surface rust on the slined knuckle and bolt on the side you see NOT IMPRESSED maybe thats why there cheap and to costly to send back for replacement BUYER BEWARE!!! HE DOESNT GET FEEDBACK

TT5 Matt

[cyclegod]

hi all
got my $55usd kick start lever today but its got h/duty surface rust on the splined knuckle and bolt on the side you see NOT IMPRESSED maybe thats why there cheap and too costly to send back for replacement BUYER BEWARE!!! HE DOESNT GET FEEDBACK

TT5 Matt

Give him a "friendly" email about it and see if he can send another to you as a replacement, I have done this a couple of times and found them reasonable.

[TT5 Matt]

ill give it a go im sick of the shite overseas ebay ladies things hand out knowing its too dear to send items back and than cant take a neg f/back on the chin that they deserve or they tit for tat a neg back to you

matt

[TT5 Matt]

beware of son-bangkok banana recons he takes a different pics for every kickstarter he puts up for auction BULLSHIT THIS ARSE WIPE TALKS WITH FORK TOUGNE   check the pic and see 2 small handling dents in front outside edge of the lever that doesnt match what ive been sent

TT5 Matt