Author Topic: Suzuki RM N/T chain guides  (Read 1157 times)

0 Members and 1 Guest are viewing this topic.

Offline Nobby25

  • B-Grade
  • ***
  • Posts: 273
  • Could possibly fit other models?
    • View Profile
Suzuki RM N/T chain guides
« on: November 01, 2011, 09:03:09 pm »
I'm Starting on a rebuild of a RM250N It has some major scars from chain derailments and I'm wanting to know what is the best setup from those who race N's or Ts. I picked up a "T" rear guide but I dont have a "N" tensioner any advice would be appriciated.
Cheers Nob
TM125L RM250N TC125L RL250M PE175T RM80C RMX250T ATC70 YZ80B?

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: Suzuki RM N/T chain guides
« Reply #1 on: November 01, 2011, 09:58:51 pm »
If you look on the cover of the latest VMX mag you'll see Gunters 400 with a KTM chain guide on it, I've fitted them to a few bikes now, there cheap as chips from KTM, piss off the spring loaded tensioner and run a T guide on the front of the swingarm.....Ive used a YZ85 guide on a RM125T aswell, just made some trick looking plates up for the sides.
QVMX.....Australia's #1 VMX club......leading the way.

Offline Toolboy

  • A-Grade
  • ****
  • Posts: 340
    • View Profile
Re: Suzuki RM N/T chain guides
« Reply #2 on: November 01, 2011, 10:20:22 pm »
Nobby,

I have a RM400N with the standard rear guide and tensioner plus the T model chain guide fitted around the swingarm (top roller removed by previous owner) and i have never had a chain de railment, i ride the bike pretty hard and have been warned but its all good.

Tim
82 RM250Z
79 RM400N
76 RM370A
74 TM400L
05 M50 Boulevard
1986 RM80G
1974 RV125
1994 DS80
2005 JR50