Author Topic: Preston Petty No-Dive on Yamaha 38mm front end.  (Read 914 times)

0 Members and 1 Guest are viewing this topic.

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Preston Petty No-Dive on Yamaha 38mm front end.
« on: June 19, 2011, 10:12:46 PM »
First up, I don't know what this is worth. Since I got it, I've been looking semi-regularly on Epay and I haven't seen any come up in the USA or Australia - so they're rare, at the very least... If you want 'em then make me a decent offer - if the whole set-up is only worth (say) $100, then I'll keep 'em...
I'm very close to Ebaying them, but thought I'd offer them here first.

I'm not 100% sure on what the forks are, but I'm pretty sure they're YZ250/400E. 38mm with ~10" of travel kinda has to be 250/400E, right? The fork boots kinda threw me, though. There's some rust between the triples, but the seal area seems very good. The photo of the rust shows the worst bits.
Everything else seems to be in good condition.
IT speedo drive included.











I can supply a front hub, if needed.

Nathan.
04000 23847

In Yass, in southern NSW.
The good thing about telling the truth is that you don't have to remember what you said.

Offline crossedup2

  • B-Grade
  • ***
  • Posts: 249
  • Never enough shed time.....
    • View Profile
Re: Preston Petty No-Dive on Yamaha 38mm front end.
« Reply #1 on: June 19, 2011, 10:43:20 PM »
Hi Nathan

PM sent.

Peter B
Anything Yamaha. AT1, CT1 (X3), RT1, DT3 (x3), YZ125X,  YZ250E, YZ400D, IT175E, IT250H, XR500RC . Always looking for Pre 78 Yamaha stuff....