« previous next »
Pages: [1]   Go Down

Author Topic: YZ250J Plastic  (Read 1410 times)

0 Members and 1 Guest are viewing this topic.

Offline whitey 43

  • A-Grade
  • ****
  • Posts: 363
    • View Profile
YZ250J Plastic
« on: February 22, 2011, 09:51:22 PM »
Hi folks, anyone have any decent YZ250 J Plastic? I need both side #plates, the front # plate & if im lucky, A front guard. If no, any ideas where I can get new ones?
Cheers,
Whitey.
Logged

Offline torm92

  • Novice
  • *
  • Posts: 48
    • View Profile
Re: YZ250J Plastic
« Reply #1 on: February 22, 2011, 10:52:13 PM »
Hi, about 2 years ago I bought front guard, right hand side plate and rear guard from Yamaha. The rest , mmm, good luck.
Logged
Restoring YZ 50,60, 80, 100 and 125. Racing a 490 and a 250. Have a complete collection of J,s.

Offline steveo247

  • A-Grade
  • ****
  • Posts: 423
    • View Profile
Re: YZ250J Plastic
« Reply #2 on: February 24, 2011, 10:50:45 AM »
yumi parts do a front guard, injection moulded as original.
ive just ordered one i can let you know how the quality is when it arrives if you like
Logged

Offline whitey 43

  • A-Grade
  • ****
  • Posts: 363
    • View Profile
Re: YZ250J Plastic
« Reply #3 on: February 26, 2011, 01:49:24 PM »
D.C stuff any good? Does it fit properly?
Logged

Offline b490

  • Legend
  • *****
  • Posts: 541
    • View Profile
Re: YZ250J Plastic
« Reply #4 on: February 26, 2011, 02:46:22 PM »
Quote from: whitey 43 on February 26, 2011, 01:49:24 PM
D.C stuff any good? Does it fit properly?

 D.C side plate I fitted to a Mates' IT250J
Real pain to fit . ... I had to make up mounting spacers  plus   plenty of trimming /heating & bending  of plastic required  to achieve a reasonable fit.
 (I suspect the  YZ side plates would not be any better, fitting-wise )
 Took me the best part of 2hrs for  left cover.

Rear guard is also D.C  but was much less hassle ( better fitting unit)  than side plate .
 
Regards ,
           Steve
                       
« Last Edit: February 26, 2011, 03:12:58 PM by b490 »
Logged

Offline whitey 43

  • A-Grade
  • ****
  • Posts: 363
    • View Profile
Re: YZ250J Plastic
« Reply #5 on: February 28, 2011, 05:33:42 PM »
Thanks, Steve. Any other suggestions anyone?
Logged
Pages: [1]   Go Up
« previous next »