montesa spoke part numbers

[ty4]

picked up spokes and no idea what model they fit
numbers as best as i can tell are
67550117
28501170
675000701
20500071
any help much appreciated

 cheers
tony

[cappra]

67550117---Should be 6750.117 All spokes are the number 50.  Enduro model, rear spoke
28501170---Cota 123,  rear spoke
675000701--Enduro model-front spoke
20500071--Cota 49, front spoke

All front spokes will be 00
All rear spokes will be 11

6750.00701
So,  67 denotes an Enduro model
      50 denotes a spoke
      00 denotes a front spoke
      701 denotes one of three size spokes for the front wheel.

[ty4]

thanks for the help
cheers
tony

[monte34]

Tony, are you selling the 123 Cota spokes, and are there any nipples to go with them?
Cheers, Rob

[hitatreeonce]

if your selling them I'll buy the 67 numbered spokes

[Big John]

Spoke nipples are a bit of a problem. Montesa use a metric thread where as most other bikes use a a gauge thread. I have a set of wheels with perfect rims, hubs and spoke's but carn't find nipples anywhere.

[ty4]

yes they are for sale, sorry no nipples
will pm details
cheers
tony

[cappra]

This is why I have over 200 sets of spokes sitting on the shelf.  No nipples!

[mx250]

This is why I have over 200 sets of spokes sitting on the shelf.  No nipples!

I found some Ducati nipples that fitted - but not enough.

I'll have to make a concerted effort - or have some made up - I've got these nice, clean, shiny, polished stain§less steel spokes and no nipples . 

[Moto]

Hi,

   What is the diameter/thread size of the spokes. Bultaco also use metric threaded spokes?

   From memory(and it could be a bad memory)that TM (the Italian type TM) also use metric threads on their spoke nipples,might be worth a check.

     Cheers.

[Big John]

I think from memory the front of my 250 Enduro (same wheel as the VR/v75) are 4 mm x 0.7 mm. I taped out a few nipples I got from the local Honda shop to get me out of trouble.