Author Topic: Desirable PE250's (Is there such a thing?)  (Read 16571 times)

0 Members and 1 Guest are viewing this topic.

oldfart

  • Guest
Re: Desirable PE250's (Is there such a thing?)
« Reply #15 on: September 26, 2010, 06:54:45 pm »
You are all on Drugs or drinking tooooo much red cordial. PE 250 X is the pick of them all.    A 77 was a Rm in disguise were as  a 81 is more refined and purpose built.
John.... yes the 77 will be more a collectors bike as you have stated  ....to say they are Desirable  - no they are not.

Offline lukeb1961

  • Legend
  • *****
  • Posts: 1019
  • PE175N, RM80B, JR50C
    • View Profile
    • PE175N
Re: Desirable PE250's (Is there such a thing?)
« Reply #16 on: September 26, 2010, 07:17:03 pm »
It's good to see the PE crowd are of one voice  ;D

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: Desirable PE250's (Is there such a thing?)
« Reply #17 on: September 26, 2010, 07:18:46 pm »
250z is more refined than 250x Stew folding brake lever and gear lever stock better forks.
1971 tm400 and PE's

monaro308

  • Guest
Re: Desirable PE250's (Is there such a thing?)
« Reply #18 on: September 26, 2010, 07:30:16 pm »
If you like PE's...THEY ARE ALL DESIRABLE  ;D

oldfart

  • Guest
Re: Desirable PE250's (Is there such a thing?)
« Reply #19 on: September 26, 2010, 08:09:00 pm »
frosty ... the X  had a better spread of power, folding brake pedal & gear lever sounds good on paper, but when they got a stick or grass wedged in them it became a pain the A
             Forks, where always a matter of opinion as the oil was too light from factory .... some put air in - others used heavier oil - I used Rm legs and triples ( rubber mounted )   

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Desirable PE250's (Is there such a thing?)
« Reply #20 on: September 26, 2010, 09:06:48 pm »
Quote
the X  had a better spread of power

Compared to what?
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: Desirable PE250's (Is there such a thing?)
« Reply #21 on: September 26, 2010, 09:38:12 pm »
That oldfart fella is just talking out of his arse....dont pay attention to him...and he's a plumber, so you could imagine what he does to his bikes!!! :D
QVMX.....Australia's #1 VMX club......leading the way.

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: Desirable PE250's (Is there such a thing?)
« Reply #22 on: September 26, 2010, 09:41:52 pm »
Plumbers have been known to be good with bikes I am an apprentice plumber no real probs with my PE's yet. ;)
1971 tm400 and PE's

DR

  • Guest
Re: Desirable PE250's (Is there such a thing?)
« Reply #23 on: September 27, 2010, 12:08:14 pm »
DESIRABILITY equates to having pleasing qualities or properties. This could apply to all makes and models to some extent so desirability is actually very individual thing and entirely in the eyes of the beholder.

The most desirable PE for me is the PE175C. In '78 I used to look long and hard at the image below



In '78 I had grand plans to get out of school and get a job to fund a spanking new PE and ride across Australia ;D it never happened ::) instead I purchased the RM400C and never looked back 8) I've 'never' owned a PE but the PE175C/N is the model I always desired. I suppose the closest I ever got would be my TS250..least it's yellow :P ;D


oldfart

  • Guest
Re: Desirable PE250's (Is there such a thing?)
« Reply #24 on: September 27, 2010, 05:13:10 pm »
Now listen up here  Crocka shit there will be no more free be's coming your way if you carry on like that :o   

Leith ... a 77 model  ;D     

Offline lukeb1961

  • Legend
  • *****
  • Posts: 1019
  • PE175N, RM80B, JR50C
    • View Profile
    • PE175N
Re: Desirable PE250's (Is there such a thing?)
« Reply #25 on: September 27, 2010, 09:09:40 pm »
You see that? DOC showing superb taste.

The rest of you, look at that Anthony Gunter shot and ask yourself...  if only you had been able to afford a suit, you would have done that too.  Chicks love it   ;D

DR

  • Guest
nos PE250B/C cylinder and other bits Ebay US
« Reply #26 on: October 05, 2010, 09:40:07 pm »
NOS PE250B/C barrel and other parts, eBay US but our dollars' travelling well remember ;)

18 hours to run if anyone's interested in a bidding frenzy..3 bidders at present ;)

http://cgi.ebay.com/ebaymotors/SUZUKI-PE250-PE-250-CYLINDER-HEAD-RINGS-77-VINTAGE-NEW-_W0QQcmdZViewItemQQhashZitem27b55ef104QQitemZ170546622724QQptZMotorcyclesQ5fPartsQ5fAccessories

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: Desirable PE250's (Is there such a thing?)
« Reply #27 on: October 05, 2010, 09:51:38 pm »
I'm gonna have a go at that so back off!! ;D
QVMX.....Australia's #1 VMX club......leading the way.

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: Desirable PE250's (Is there such a thing?)
« Reply #28 on: October 05, 2010, 10:03:06 pm »
I was thinking about it but I have one not everything always has to be nos. ::)
1971 tm400 and PE's

Offline Marc.com

  • Legend
  • *****
  • Posts: 3887
    • View Profile
Re: Desirable PE250's (Is there such a thing?)
« Reply #29 on: October 05, 2010, 10:14:40 pm »
I was thinking about it but I have one not everything always has to be nos. ::)

It is if you are certain NZders I know.

Anyway 250 was always ho hum, desirable is PE400T/ better motor than the RM400T and has the grunt the 250 should have had. For my money the only time the PE ever leap frogged the RM in development.
formerly Marc.com