$5 sale.

[Nathan S]

1. 16" rear tyre. Pirelli (can't recall what model, can find out if it matters). Good used condition, ex-serious racer. $5.


2.SOLD.Yamaha RX125 motor. Turns over, reasonable compression. What you see is what you get. Splines on kick start and gear lever are OK. $5.




3. SOLD, pending payment AG swingarm. Has been bead blasted and painted. $5.
4. SOLD, pending payment DT100/125/175 twin shock swingarm. $5.



5. Assorted Yamaha brake plates. $5 each.
Top row, left to right: DT125/175A (also CT1); DT125/175 late twinshock/very early monoshock; DT125/175 monoshock.
Second top row: DT1/RT1, DT250/360A (both the same).
Middle and second bottom row: All of these are the same - IT175D/E/F, YZ125D/E, DT125/175 monoshock. May also suit single cam XT250?
Bottom row: DT400 monoshock (maybe also DT250 mono?); I don't know... Maybe single cam XT250?


6. Top triple clamps. $5 each.
L to R: RT1/DT1; RT1/DT1 (34mm forks); late DT175 twinshock/early monoshock (31mm??? forks?); AT1/CT1/DT125/175 early monoshock (30mm forks???).


7. More top triple clamps. $5 each.
L to R: YZ125X/YZ250/400C (36mm forks); KDX175/KLX250; YZ125D/E/F/G, IT-D/E/F etc (36mm forks); KLX250/KDX175.


8. Lower triple clamps to match the above, plus two pairs of lowers for single cam XT250. $5 each.



9. SOLD, pending paymentTL125 (I think) front wheel. Note flat spot at ~12 o'clock position. Includes brake and axle as pictured. $5.


10. Oil injection tanks. Nice straight, unrusty tanks but will need a rinse out. $5 each.
DT250A (will also suit DT250/360/400 twinshock) and DT100 (will also fit DT125/175 twin shock.

I can't remember what this one is from... DT100/125/175 twinshock, I think.


11. IT250K pipe. Some rough repairs to the header, but useable. $5.


12. IT175G/H swingarm and shock. $5 each. Also have another swingarm.


13. SOLD, pending payment YZ250J pipe. Quite a good header, but squashed body. Definitely fixable. $5.


14. DT100/125/175 twinshock pipes, DT250/360/400 twin shock pipes, AT1/CT1 pipes. May also be early AG pipes in there too. $5 each.


ALL OF THIS WILL GO IN THE NEXT SCRAP METAL RUN UNLESS I HAVE BEEN PAID FOR IT.
I'm not going to hold onto any of it for anyone - either you can PayPal/Direct Deposit the cash, or you don't really want it. There's too much other crap still sitting here that I've held onto because people have said "Yeah I'll grab it when..." (the road to hell is paved with good intentions and all that).

I am happy enough to post at buyer's expense, but only if you make my life easy.

Nathan.
04000 23847
Its all in Yass, southern NSW. Can deliver to Canberra most weekdays, Rockley Vinduro, and maybe Wollongong/Sydney if you're not in a screaming hurry.

[steveo247]

ill take the 125x tripple clamps mate. if your willing to post them!

send me a PM with your bank details and how much you want for them including postage.
to bathurst nsw 2795.

thanks

[Nathan S]

The bottom one is pretty corroded - you can just see it in the bottom left corner of this pic:

http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/ForceAle2010June/DSCN0852.jpg

It's probably a bit worse that the scabby looking KLX triple in the same pic. If you still want, then I reckon $20 all up will cover it.
Not coming to Rockley?

[Billet YZ]

Hi Nathan,
              i will buy the yz 250 j pipe off you if it is still available, also what pipe is hanging behind the j pipe and is it for sale. Can you pm me your bank details for direct deposit and also a total cost including postage to Melton Vic 3337. Regards Peter.

[Nathan S]

Its a near-new pipe off a late model KX125. If you want it, make me an offer.

Auspost's new online calculator is a turd to use, but is suggesting ~$25. The weight doesn't seem to matter compared to the size (up to 16kg anyhow), so the KX pipe probably wouldn't add to the cost.

[Billet YZ]

Its a near-new pipe off a late model KX125. If you want it, make me an offer.

Auspost's new online calculator is a turd to use, but is suggesting ~$25. The weight doesn't seem to matter compared to the size (up to 16kg anyhow), so the KX pipe probably wouldn't add to the cost.

 Thanks Nathan,
                       i will just take the yz pipe off ya hands as i have no use for the kx pipe, i will do the direct deposit as soon as i have your details.  Peter.

[pbear62]

Hi Nathan, What are you using the MRF's on? We manage & run their team in the APRC.

[matcho mick]

bags the TL125 front wheel,cut the brake drum out Nathan ,(you'll get $5 scrap alloy on rim,doubling your $'s ),will text,

[jimson]

Nathan if you still have the RX125 engine I'll take it with the DT1 backing plate and DT1 triple  top and bottom clamp and the two little yamie swing arms please.jimson

[Davey Crocket]

Ya too fuggun dear mate ...would you have a top tripple clamp to suit YZ/MX 250B style 34 mm? cheers big ears.... how's those 125 gearchange covers coming along?

[steveo247]

The bottom one is pretty corroded - you can just see it in the bottom left corner of this pic:

http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/ForceAle2010June/DSCN0852.jpg

It's probably a bit worse that the scabby looking KLX triple in the same pic. If you still want, then I reckon $20 all up will cover it.
Not coming to Rockley?

sorry have been so busy.
didnt have a chance to get out to rockley, even though its twnety minutes from my place dammit!


still want them if you have not tthrown them out.

[Rhodesy]

Can i please get the dt175 twin shock exhaust off you ooh and the injection tanks too

[Freakshow]

Nathan do you have any 34mm lower alloy MX 250/360 lower tripples in there   ill pay more than $5 too

[Freakshow]

.... how's those 125 gearchange covers coming along?

HOw are those ones coming i sent you John ?? only thing i need to finish of that motor and you have all the ones i have.........